System information

Output Power
(Per Channel, 4
Ohms) Wrms
Output Power
(Per Channel, 8
Ohms) Wrms
Output Power
(Bridged Mono, 8
Ohms) Wrms
THD
Frequency
Response
Dimensions (hxwxd)
PV900 300 180 600 < 0.03% 20Hz – 20kHz 89mm x 483mm x 392mm; 13kg
PV1500 500 300 1,000 < 0.03% 20Hz – 20kHz 89mm x 483mm x 392mm; 15kg
PV2600 900 550 1,800 < 0.03% 20Hz – 20kHz 89mm x 483mm x 392mm; 18kg
PV3800 1,300 775 2,650 < 0.05% 10Hz – 100kHz 89mm x 483mm x 392mm; 20kg
Output power
(per channel, 2
ohms) WRMS
Output power
(per channel, 4
ohms) WRMS
Output power
(per channel, 8
ohms) WRMS
Output power
(bridged mono,
8 ohms) WRMS
THD
Frequency
response
Dimensions
(hxwxd)
CS1400 330 500 700 1,400 < 0.05% 10Hz – 35kHz 89mm x 483mm x
446mm; 15kg
CS2000 1,075 760 495 2,150 < 0.05% 10Hz – 35kHz 89mm x 483mm x
392mm; 17kg
CS3000 1,550 1,065 650 3,100 < 0.05% 10Hz – 35kHz 89mm x 483mm x
392mm; 19kg
CS4000 2,000 1,350 800 4,000 < 0.05% 10Hz – 35kHz 89mm x 483mm x
392mm; 21kg
CS4080HZ n/a 2,040 1,250 4,080 < 0.05% 10Hz – 35kHz 89mm x 483mm x
392mm; 22kg
10
Power Amplifiers
Amplifiers
Power Amplifiers - Two Channel Low Impedance
Peavey PV series amplifiers
Featuring Peavey’s DDT™ distortion detection technique (which
virtually eliminates distortion caused by over-driving the amplifier),
the PV series is rugged, value-priced family of hardworking analogue
amplifiers. The PV series also features Peavey’s patented Turbo-V™
cooling design, which cools the power transistors more evenly than
traditional heat-sink designs, leading to long service life (which is
backed by APG’s five year warranty).
• Industry-standard 2RU size
• Combi-jack (XLR and 6.35mm inputs)
• Input gain control per channel
• Speakon and binding post outputs
• Switchable low cut filter
• Switchable crossover for subwoofer operation
• Front panel LEDs show signal presence, DDT active
• Five year warranty
Peavey CS amplifiers
Building on the reputation of the world-famous Peavey CS series,
which conquered the power amp market in the 1970s, the updated
CS
®
Series is the global standard-bearer for workhorse reliability.
Over the years, these amps have benefited from some of Peavey’s
most popular audio innovations, including the exclusive DDT™
compression/anti-clipping protection. With its 2 RU design and
power points up to 4080 watts, this latest evolution of the CS
®
Series
is leaner, louder and lighter than ever. Like all Peavey products, the CS
Series is backed by a five year warranty
• Industry-standard 2RU size
• Combi-jack (XLR and 6.35mm inputs)
• Input gain control per channel
• Speakon and binding post outputs
• Supports 2-ohm loads (except CS4080HZ)
• Front panel LEDs show signal presence, DDT active
• Five year warranty
www.peavey.com.au