COLOR CHANGING BLUETOOTH TRANGLE SPEAKERS CB‐335072
INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY & RETAIN FOR FUTURE USE Getting Started Remove the unit from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list. Package Contents BT560 Light Show Speaker USB rechargeable cable 3.5mm AUX plug cable Instruction manual Features 1.
11. Keep this product out of reach of children. 12. This product is not a toy. Do not play music at excessive levels especially near children, as damage to 13. hearing may occur.
Item Function Operation ① 3.5mm AUX slot(line in) AUX (line in)mode of operation through audio device. ② DC Charging Port To charge the speaker (Charging cord included). ③ Power ON/OFF switch Turn ON/OFF the speaker ④ (+) button long press will increase the volume level.
speaker is now in pairing mode. (Note: Speaker automatically pairs with the previously paired devices) Pairing your device with Bluetooth Speaker – Your Bluetooth Speaker can wirelessly stream audio from any Bluetooth enabled device within the distance of 27‐33 Feet. Simply follow the below steps. 1. Press Power ON/OFF about 3 seconds, the light and speaker both on 2. You would hear two short music notice message; first one means power on. Second one the speaker is now in pairing mode. 3.
4. Select your favorite song at the source device. 5. Long press + button to increase the volume or long press – button to decrease the volume. 6. Do’s and Don’ts 7. Do not play music at excessive levels. Damage to hearing and/or equipment may result. 8. Do not use outdoors in wet or in damp surroundings. Specification Bluetooth version : 3.0 Speaker : 3 Watts Impedance : 4 ohms Play time : Up to 4 hours Charge Voltage : DC5V (USB) Bluetooth Range : 33 Feet Built‐In Rechargeable Battery : 3.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
