User`s manual

9
SET TIME & UNIT
You will need t o set time and unit for first-time use or
after replacing the battery.
S
tep1 Press the Set Button.
" " and the flashing hour appear first.
S
tep2 Set hour&minute
Press the On/Scan button to select the
correct hour.
Press the Set button and t he f lashing
minute then appears.
Press the On/Scan button to select the
correct minute.
Press the On/Scan button to select.
“
“
“
“
Setting is all completed. Select either of the following
two modes to exit setting.
OFF mode: Just leave the meter without pressing. It
will be automatically off after 30 seconds.
CLOCK/RT mode: Press the Set button after Step3.
Without pressing any buttons over 30 seconds, the
meter
will automatically turn off.
NOTE
Set button
Step4 Select Beeping sound
Press the On/Scan button to select on/
off the Beeping sound.
Step5 Select LCD backlight
Press the On/Scan button to select on/
off the LCD backlight.
Step3 Select °F or °C
Press the On/Scan button and °F/°C is
displayed next.