Bitvae S3 Sonic Electric Toothbrush User Manual Thank you for choosing sonic electric toothbrush. Before using this product, please read this manual carefully to master the correct way to use the electric toothbrush.
Attention 1. When using this product for the first time, it is recommended to use sensitive mode. If you experience discomfort or bleeding gums for more than 2 weeks, please stop using this product and consult your dentist. 2. When starting the toothbrush for the first time. In case of low power or no power, please charge the toothbrush fully before using it. 3. Do not put the product in fire. Do not charge, use or place it in high temperature environment. 4.
contact with skin. 13. Do not place the product in the mouth or brush your teeth in supine position, otherwise it may lead to accidental swallowing. 14. Children cannot play with this product or disassemble it. 15. Keep this product away from children and infants. 16. This product contains small parts such as "brush head protection cover", which should be keep away from children. When using this product or replacing the brush head, please discard the brush head protection cover firstly. 17.
Product design Features 1. Waterproof and non-slip design 2.Five Mode Clean：Suitable for normal oral environment, maintain healthy oral hygiene. Sensitive: Suitable for users with moderate cleaning requirements and sensitive teeth. White: Frequency conversion alternately vibrates, cleans and promotes blood circulation of the gums, effectively polishes and whitens the teeth.
. Gradual increase in vibration In order to prevent toothpaste from splashing, the vibration frequency gradually increases when each gear is activated. 6. Memory function Mode Each time you use it for 5 seconds or more, the electric toothbrush will remember the brushing mode currently used; when you use it next time, press the power button to automatically turn on the mode and intensity of the last use. 7.
12.Power on Charge in the off state or press the power button shortly, the mode light will turn from bottom to top, and the power on state will be turned on. 13. Power off Press the power button for 10 seconds, the mode light will run from top to bottom once, and the power off state will be turned on. 14. Button mode exchange When power on, shortly press the button mode exchange within 5s; shortly press the stop button within 5-15s; after 15s shortly press can enter into the hold on state.
④Real-time brushing, animation guidance: When brushing teeth, the toothbrush recognizes the user's brushing position, judges whether the current guidance position is correct, and accumulates the effective brushing time in the area; when an abnormal position is identified, the effective brushing time is not accumulated (reminder the posture is incorrect) ⑤Important care reminder: the sensitive area of the gums will automatically reduce the intensity (to the minimum intensity of 1); the APP will remind you wh
reminds you to charge in time -Please insert the charging cable into the charging port. After the power is safely connected to the power supply, the charging white light flashes slowly to indicate that it is charging. - After fully charged, the charging lights are all on for 2 minutes and then turn off. 2. Steps of brushing teeth -Fix the brush head to the handle. -Wet the bristles and squeeze an appropriate amount of toothpaste.
Device Connection Why can't I find the device? Please make sure your Bluetooth settings are on and that your electric toothbrush is powered and connected! Can you bind multiple toothbrush devices? The APP can bind multiple toothbrush devices, and the data of different toothbrush devices can be saved separately, and the device management department can switch or add devices How do I add a new device? 1.
3. There is a foreign body at the charging interface Service support 1. Since the date of purchase, if the fault is caused by non-human factors, you can repair the machine for free within 1 year . 2. During the warranty period, if the product cannot work due to the design, we will replace parts or the whole product for free. 3.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet émetteur ne doit pas être colocalisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur. The device has been evaluated to meet general RF exposure requirement.
