Service manual

Disassembly
Removing the 2nd Modular Drive Bay (Bay Two) CD Device 2 - 7
2.Disassembly
Removing the 2nd Modular Drive Bay (Bay Two) CD Device
1. Turn the computer OFF, remove the battery (page 2 - 6) and turn it over.
2. Remove screws - in (Figure 2 - 2a), then lift the 3rd Modular Drive Bay cover off and set it aside.
3. Remove screw (Figure 2 - 2b), then gently push the device out of the bay (you may need to use a screwdriver to
do this).
Figure 2 - 2
2nd Modular Drive
Bay (Bay Two) CD
Device Removal
Sequence
a. Remove the screws
from the Bay Three
cover.
b. Remove screw 5.
c. Push the device out of
the computer.
1 3 4
5
a.
b.
2
1
3
c.
5
4
6

4. Drive Bay Cover
6. CD Device
•4 Screws