Service manual

Disassembly
2 - 14 Removing the System Memory
2.Disassembly
Removing the System Memory
1. Turn the computer OFF, remove the battery (page 2 - 6) and keyboard (page 2 - 13).
2. Remove screws - (Figure 2 - 9a) from the shielding plate (Figure 2 - 9b), and lift the plate up off the
computer.
3. Locate the memory sockets & (Figure 2 - 9c), and gently pull the latches & (and/or & ) on the
memory socket toward the front and rear of the computer as indicated.
4. The module (Figure 2 - 9c) will pop-up, and you can remove it.
5. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
Figure 2 - 9
Memory Removal
Sequence
a. Remove the screws
from the shielding
plate.
b. Remove the shielding
plate.
c. Pull the latches on the
memory sockets to
release the mod-
ule(s). When the
module pops up, lift it
out.

4. Shielding Plate
7. Memory Module(s)
•3 Screws

Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the clean-
est hands have oils
which can attract parti-
cles, and degrade the
module’s perfor-
mance.
1 3 4
5 6 8
9 10 11
7
3
c.
a.
2
1
b.
4
5 6
5 6
7
c.
8
9
10
11