Service manual

2 – 14
D ISASSEMBLY
2. DISASSEMBLY
LCD MODULE REMOVAL
Part A
Remove the Back Cover. (page 2-4)
Remove the I/O Bracket. (page 2-11)
Part B
1. Remove 6 screws (A, B, C, D, E & F).
2. Disconnect the following 8 cables and 3 ground wires.
8 Cables
(C1 & C2) The LCD to Inverter Board (two cables from Connectors CN2).
(C3) The LED + Inverter Board to System Board (LED cable from Connector CN31).
(C4) The LED + Inverter Board to System Board (Inverter cable from Connector CN32).
(C5) The LCD to LED + Inverter Board (from Connector CN1).
(C6) The Left Speaker to System Board (from Connector CN33)
(C7) The Right Speaker to System Board (from Connector CN34)
(C8) The LCD to System Board (from Connector CN8)
3 Ground Wires
(W1) A ground wire fixed to the Left Speaker with a screw.
(W2) A ground wire fixed to the Right Speaker with a screw.
(W3) A ground wire fixed to the System Board with a screw.
LCD Module Removal