Wireless Headset- User Guide

Pairing Name: ODNW3xUCx
Bluetooth Speification: CSR-V5.0, dual mode, downward compatible
Frequency Range: 2.4GHz-2.480GHz
Support Protocols: A2DP, AVRCP, HFP, AAC, etc
Two Bluetooth devices can be connected at the same time
Transmission Distance: up to 30 meters (Transmission distance depends
on the environment and Bluetooth device)
Maximum Talk Time: 20 hours
Standby Time: 200 hours
Working Temperature: 0℃ to 45℃
Speaker:
Sound Channel:
Microphone:
Headset Battery:
Charging Base:
Headset Net Weight:
Frequency: 20Hz-20KHz, Hi-fi
Distortion: ≤1%
Binaural: Stereo
Monaural: Mono
Net Weight: 115g
ODNW30UC/ ODNW30UCB Mono 70g
ODNW35UC/ ODNW35UCB Duo 95g
Type: Lithium-ion polymer
Battery Capacity: 320mAh
Charging Voltage: 5V DC
Life Time: Minimum recharging 1000 times
Operating Temperature: -10℃ to +60℃
Charging Time: 2 hours
Charging Interface: Micro USB
Microphone: Directional noise reduction microphone
Acoustic Noise Canceling Structure
Crystal clear sound and voice (DSP)
Fully Charged
1. Be sure that your smart phone, laptop or desk phone has Bluetooth function.
2. Activate the Bluetooth function on your smart phone, laptop or desk phone.
3. Turn on your headset (slide switch to “ON”), you can hear prompt tone
“power on”. The Led indicator will flash red and blue alternately, which
indicates the headset is in pairing mode.
4. (If pairing fails, the headset will power off automatically after indicator
flashes 5mins, with prompt tone "power off" heard.)
5. Pair headset to your smart phone, laptop or desk phone.
1) Search Bluetooth device on your smart phone, laptop or desk phone.
Pairing with Bluetooth Device:
2) Open “Bluetooth” menu and press “discover” or “add” to search
ODNW3xUCx on your smart phone, laptop or desk phone.
3) When ODNW3xUCx shows on your Bluetooth devices list, please click it to
start pairing. Prompt tone “connected” will be heard when pairing is successful,
and the LED indicator will repeatedly flash blue every 5 seconds.
4) This headset can store devices ever paired in memory. When powered on,
the headset will automatically connect to the first two devices in memory.
Function Introduction
1. Pair with 2 devices simultaneously
ODNW3xUCx can pair with 2 devices simultaneously.
1) Connect the first device with ODNW3xUCx
2) Turn off the Bluetooth function of the first device
3) Connect the second device with ODNW3xUCx
4) Turn on the first device's Bluetooth function, then ODNW3xUCx is paired
with both devices.
2. Redial function
Quick press the multi-function button twice to redial the last call.
3. One-touch play function
Press the multi-function button once, the default music player of the
mobile phone will play automatically (some mobile phones cannot
implement this function).
4. Automatic re-connection function
Bluetooth connection can be automatically re-connected even if
disconnected within 5 minutes in the effective distance. If reconnect
fails, please turn off the headset and turn it on again to reconnect.
5. Mic mute function
Press the Mute button to activate mic mute during a call, repress the
mute button to cancel mic mute. The tone “toot” will be heard every 3
seconds during mic mute status.
Customer Name
Product Model No.
Date of Purchase
Tel No./E-mail:
Problem Description:
Microphone
Speaker Battery Buttons
OQC
CHECKING
Product Warranty Card
Cautions
1. Most mobile phones have headset power on screen display. When headset
battery is low, the headset will beep once in 5 minutes and the indicator will
turn red. Please charge it in time.
2. Do not connect the full-charged headset to the charging circuit for a long time.
Overcharging will shorten battery life.
3. Please keep the headset battery safe. Do not put the battery or the headset
into fire or water to avoid explosion.
4. Do not use headset with high volume for extra long time, which may cause
hearing loss. Always listen at a moderate level.
5. Don’t charge with high voltage device, which may cause damage to the
headset.
6. Make sure that the headset is fully charged before using it if unused for a long
time.
7. Lifetime of the battery will be significantly reduced if your device is left
uncharged for a long time. We therefore recommend that you recharge your
device at least once a year.
Warranty:
Failure of headset buttons, speaker or microphone; charge unavailable.
Out of Warranty:
1. Ear cushions broken.
2. Fail to follow the user manual or disassemble the headset.
3. Incorrect connection with high voltage device for charging which causes
earphone damage.
4. Artificial damage caused by impact, falling, water, pulling.