Air Purification System CLI-AP35 | Installation & Operating Instructions
Congratulations on your purchase of a Cli~Mate Air Purification System This Air Purifier improves the quality of the air in your home by helping to eliminate airborne matter such as allergens and unpleasant odours. Note: Please read through the instructions carefully before using or installing the product and ensure that the manual is kept in a safe place for future reference. The system must be properly installed and located in accordance with the installation instructions before it is used.
SAFETY PRECAUTIONS Read all instructions carefully. • All components need to be installed in accordance with the user manual instructions for correct performance of unit. • This appliance should be used in conjunction with a safety switch.
PRODUCT FEATURES Filter The 3 layer filter contains a Pre-filter, a HEPA filter and an activated carbon filter. • The Pre-filter traps larger particles such as dust, pet hair and large-sized allergens. • The HEPA filter (Grade H12) removes 99.5% of particles as small as 0.3 microns and greater from the air. It is capable of removing smoke, dust, pollen, pet dander, mold spores, bacteria and allergens in the air.
COMPONENT IDENTIFICATION 1. Front Cover 2. Control buttons 5 3 2 3. Air Outlet 4. Pre-filter, HEPA and active carbon filter 5.
C CONTROL PANEL/BUTTONS A 1. “POWER” BUTTON: Turns unit on or off. E B 1 D 2 3 4 5 2. “AUTO” Mode: In this mode, the speed of the air flow/fan speed will change automatically depending on the air quality as detected by the dust and odour sensor. NOTE: The AUTO button is also used to reset the filter timer. Press and hold button for 5 seconds to reset filter timer. 3. “SPEED” Options: Allows selection for desired speed setting – low (I), medium (II), high (III). 4.
PRODUCT SPECIFICATIONS Model Code Dimensions (mm) Coverage area Power consumption Net weight Clean air delivery rate Air Purifier CLI-AP35 390 (L) x 145(W) x 428(H) mm up to 30m2 50 watts 4.5 kgs ≥145 cfm Noise level at High speed <50dB Noise level at Low speed <30dB Replacement filter CLI-AP35-RF 4. To select the fan SPEED, press the button until the light icon illuminates on the desired speed - low (I), medium (II), high (III). 5. To select SLEEP mode, press the button.
CLEANING THE PRE-FILTER, HEPA AND ACTIVATED CARBON FILTER REPLACING THE FILTER It is recommended that the Pre-filter (the removable black layer) is cleaned every 1-2 weeks of operation, depending on the air quality of the room. When the lifespan of the 3-layer filter reaches its end, the icon light located under the “REPLACE FILTER” will flash, indicating that it needs to be changed. Discard the old filter and replace with a new one. It is not reusable.
TROUBLE SHOOTING BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST. Problem No Power Unit overheating The unit is not effective Possible Causes What To Do 1. Unit is not plugged into a wall socket. 1. Check the connection to wall socket. 2. Front cover is not latched firmly in place. 2. Remove and reinstall front cover. 3. The filter has not been installed firmly in place. 3. Remove and reinstall the filter. 1. Air ventilation around unit not sufficient. 1.
Problem Possible Causes What To Do Odour coming from the air outlet 1. Filter may be heavily soiled and due for replacement. 1. Replace filter. 1. Unit is on an uneven surface. Excessive/loud noise 2. Foreign objects have fallen into the unit. 3. Faulty internals. 1. Ensure the unit is placed on a level surface. 2. Ensure that no foreign objects have fallen into the unit via the air outlet. 3. Call customer care.
Your Aquaport Australian 1 Year Repair or Replacement Warranty Conditions of this Warranty: Aquaport warrants this appliance to the first purchaser and subject to the stated conditions: 1. This product has been fully installed in accordance with the user manual installation instructions. Warranty covers any defects in material or workmanship in the manufactured product within the first twelve months from the date of purchase. 2.
CUSTOMER HOTLINE: 1300 764 325 Aquaport Corporation Pty Ltd 70 Hardys Road, Torrensville SA 5031 Telephone: 08 8354 0711 Facsimile: 08 8354 0722 Email: aquaport@aquaport.com.au New Zealand Customers Telephone: 0800 210 190 Email: info@aquaport.co.nz Social: Web: www.cli-mate.com.