entertaining and educational toy User Manual 用户手册 Manuel de l'Utilisateur Руководство пользователя ユーザーマニュアル
ClicBot App Installation Usage Instructions ClicBot App Installation Advice on the use Usage Instructions Download ClicBot App which is available for iPhone and Android, or scan the QR code below to download and install ClicBot App. Quick Start Guide describes the basic instructions on how to control your ClicBot and three robot characters in the ClicBot world. ClicBot App only supports iOS 9.0/Android 5.0 and higher.
Contents 1.
Specification of Modules Specification of Modules Brain module Brain module is the master control and the power supply unit of ClicBot. It adopts ARM-A7 processor and includes a rechargeable polymer lithium battery with a capacity of 1550mAh. The eye of ClicBot is a 1.96-inch rotatable touch screen. It contains camera & face recognition, gesture sensor and camera light in the upper-left area of the screen.
Specification of Modules Specification of Modules Wheel module Skeleton module Skeleton module is the bone of ClicBot which is used for building the limbs. There are two connectors at the top and bottom and two strip status indicators which can indicate the connection status of two connectors and update status.
Specification of Modules Specification of Modules Accessory - Mount Accessory - Locker Mount is used for fixing your ClicBot on a table with Mount sticker. Dimension Net weight 75.3*75.3*45.8 mm 60 g Please use the Mount sticker provided by KEYi Tech to ensure firm. 8 Accessory - Holder Locker is used for reinforcing the connections between two modules. Dimension Net weight 47*36*15.4 mm 11g It can be used where suffers more stress. Step1 Step2 Connect Locker between modules. Rotate Locker.
Specification of Modules Specification of Modules Suction Cup module Smart Foot module Smart Foot module is a functional module of sensor which is used as the feet of ClicBot. It includes highly sensitive pressure sensor and can control and measure the terminal pressure by utilizing a micro-processor. Smart foot has a orange indicator. The luminance of indicator will automatically brightens when the pressure is increasing after connecting onto ClicBot.
Specification of Modules Specification of Modules Grasper module Distance Sensor module Distance Sensor module is a functional module of sensor. It includes highprecision infrared probe and can control and measure the distance from an obstacle by utilizing a micro-processor. Diameter Net weight Detection distance range Freedom degree of regulation range Connector 12 40*40*82.
How to connect modules How to connect modules Two modules can be connected with each other in parallel/non-parallel direction. All the ClicBot modules can be connected with each other by connectors. A connector contains A-conn, B-conn and golden po-go pins. It is to fix A-conn to B-conn by cross connection, and the golden po-go pins are used for transferring instruction and supplying power.
Battery and Charging Connection Device Connection Internet Connection The battery status is indicated by different colors of the power light on Brain module, and viewed in the system menu. Battery Status Green→Charged Full Orange→Charging Red→Power Empty When the battery is low, there will be an alert on the screen. Please charge the battery in time to ensure the normal operation and maintain the battery life.
Connection Safety and Privacy Safety Information Brain module can be connected via hotspot when Wi-Fi is not available or the signal is weak. How to connect to ClicBot App via hotspot: 1. Click Home button “—” on Brain module back to the system menu, choose “ ”and then “Hotspot Connection” to generate the QR code; 2. Open ClicBot App, click “ ” and then choose hotspot connection at the top-right of Brain module page to enter into the connection page; 3.
Safety and Privacy After-sales Service We commit that, in case any defect of your ClicBot modular robot product and its accessories is found during use in accordance with User Manual due to faulty workmanship and confirmed by test technician, your ClicBot will be covered for electronic component for 1 year from the date of purchase, and material and motor for 6 months from the date of purchase.
FAQs How to turn on/off ClicBot? Long press the power button on the rear side of Brain module for 3 seconds to turn on ClicBot. Press the power button on the rear side of Brain module and then choose the shutdown option to turn off ClicBot, or long press the power button for 4 seconds to force a shutdown. Diagnostics - Auto Shutdown To maintain the battery life, ClicBot will be shut down automatically in the following situation： 1. No operation for longer than 20 min; 2. Battery power is lower than 10%.
