Datasheet

CLIFF
Cliff Electronic Components Limited,
76 Holmethorpe Avenue, Holmethorpe Ind. Estate,
Redhill, Surrey 1 2 U.K.RH PF
Tel: [phone] Fax: [phone]
www.cliffuk.co.uk
ü
RoHS
© 10/14 .1CLIFF ISS
Cliff Quicktest QT3 is a compact, robust, power connector designed for temporary, safe and efficient connection of
unterminated cables to 440V AC, three-phase power supplies. The QT3 has a maximum rating of 16 amps*.
The Cliff QT3 is designed for use in applications including manufacturing, test and repair, calibration, measurement,
and anywhere a fast, safe and non-permanent connection to a three-phase power supply is required.
Connection to the Quickest takes just a few seconds. Simply open the lid, which automatically isolates the three
phase supply, insert each bare cable end by pressing the five colour-coded piano key cable clips, and then close the
lid to complete the circuit between the device being tested and the power supply. Opening the lid again isolates the
supply source so the conductors can be rapidly removed.
Features
§ Quick Release colour coded cable clips marked L1, L2, L3, N, & E
§ Each phase protected with 16 amp* fuses as standard.
§ Each phase fitted with an individual neon indicator lamp to indicate when the each phase is live.
§ Bench mounted or free standing.
Specification
§ Size (HxWxL) 49mm x 100mm x 160mm *Duty Cycle (per 10 minutes)
§ Maximum Rating: 16 amps* 440Vac 16 amps – 10%
§ Operating Temperature : -10 C to +40 C 13 amps – 25%
o o
10 amps – 40%
7 amps – 80%
Part No. 5 amps – 100%CL18303
WARNING:
§ Always connect the earth connection for safety.
§ Always use in conjunction with an RCD
§ Must be used by suitably trained and qualified personnel when making connection to the mains supply.
§ For test purposes only. Must not to be used for permanent or semi-permanent connections.
§ It is the end users responsibility to ensure this device is used in a safe manner to ensure no injury is caused
to operators.
3 PHASE QUICKTEST QT3