CLIFF ™ Cabinet Accessories from Cliff UK Cliff Electronic Components Limited 76 Holmethorpe Avenue, Holmethorpe Industrial Estate, Redhill, Surrey RH1 2PF. United Kingdom. Tel: +44 (0)1737 771375 Fax: +44 (0)1737 766012 E-mail: sales@cliffuk.co.uk www.cliffuk.co.
CLIFF HANDLES Our range of handles is intended for use on wood, MDF, chipboard or metal enclosures. Manufactured from a range of material including ABS, Glass Reinforced Nylon and PP, they are designed to enhance the appearance and functionality of any equipment to which they are fitted. Some parts can be custom branded. CH-1 Pocket Handle CH-1A Pocket Handle CH-1 CH-1A CH-1 & CH-1A are for use on cabinets up to 19mm thick, or metal enclosures. For wood use screw No.
CLIFF HANDLES Rack and Strap Handles CH-3A & CH-3B CH-3A One piece moulded cabinet rack handle. Matt black finish. For fixing, use a No. 6 self tap screw 5/8” long. Two sizes. Smaller CH-3A for 2U cabinet. Larger CH-3B for 3U cabinet. Part No. CH-3A - CP3016 Weight 9.2Kg./1000 Part No. CH-3B - CP3017 Weight 18.3Kg./1000 CH-3B CH-4 Strap handle and fixing ends. Textured matt black finish. Breaking strength >200Kg. Fixing by suitable wood screw or nuts and bolts. Part No.
CLIFF HANDLES Rack and Strap Handles E Ends shown CH-5E 6” long strap handle. Black vinyl handle with steel insert. Visible screws. Weight 3.1Kg./100 CH-5D has snap-on screw covers. Weight 3.8Kg./100 CH-5 strap only (OD65632) D ends (pair) (OD65638) E ends (pair) (OD65636) CH-6E 8” long strap handle. Black vinyl handle with steel insert. Visible screws. Weight 3.5Kg./100 CH-6D has snap-on screw covers. Weight 4.2Kg.
CLIFF RECESS PLATES SRP-1 SRP-1 is moulded in black (std), white or grey plastic, designed to allow flush mounting on the front of a cabinet for our S2 and S4 type jack sockets. This recess plate can also be used for lamps, switches etc. for enhancing the external appearance of cabinets and entertainment equipment. Made with a matt non reflective surface finish. Part No. CL1396 Weight 2.8kg./1000 SRP-2A This mounting plate is designed to accommodate a wide variety of input / output connectors.
CLIFF CABINET FEET PF-1 (CL1914) Moulded plastic foot. Ø37mm. Tough and durable. Fixing is by woodscrew size No. 8 or 10. Standard colour black. Weight 7.2kg./1000 PF-1GFN (CL19145) Special heat resisting version used for laboratory equipment. RF-1 (CL1916) Same as PF-1 but made from synthetic rubber, for non-slip applications. Weight 9.6kg.
CLIFF CF-1 CABINET CORNERS Interlocking Corners / Feet (For Stacking Cabinets) CF-1 is a general purpose, tough cabinet corner. Its style matches WCF-1 and together they can be used when making wedge type speaker boxes. Weight 15Kg./1000 Part No. CF-1 Corner - CL19169 CF-3 CF-4 CF-3 is a low cost moulding designed for use on speaker and amplifier cabinets. The design incorporates raised sections which act as stand-off feet and interlock when identical size cabinets are stacked on each other. The 12mm.
Other parts we make which can be used in Cabinets & Enclosures. JACK SOCKETS - MANY TYPES & STYLES. KNOBS - 99,000 VARIANTS POSSIBLE. TERMINALS - 15A, 30A, 60A. XLR CONNECTORS - METAL & PLASTIC. CLIFFCON TOUCHPROOF PLUG & SOCKETS - 4 POLE & 8 POLE. SWITCHES - PUSH / TOGGLE / ROCKER. POTENTIOMETERS - ROTARY & SLIDER. These products are shown on our website www.cliffuk.co.
