Datasheet

CLIFF
Cliff Electronic Components Limited,
76 Holmethorpe Avenue, Holmethorpe Ind. Estate,
Redhill, Surrey 1 2 U.K.RH PF
Tel: [phone] Fax: [phone]
www.cliffuk.co.uk
ü
RoHS
© 11/14 . 2CLIFF ISS
Part Numbers:
CP30060 AUDIO CONN AT-XLR-M (Male - Solder bucket)
CP30070 AUDIO CONN AT-XLR-F (Female - Solder bucket)
CP30080 AUDIO CONN AT-XLR-F LATCHING (Female - Solder bucket with latch)
CP30061 AUDIO CONN AT-XLR-M PCB (Male - Vertical PCB)
CP30071 AUDIO CONN AT-XLR-F PCB (Female - Vertical PCB)
CP30081 AUDIO CONN AT-XLR-F LATCHING PCB (Female - Vertical PCB with latch)
CP30062 AUDIO CONN AT-XLR-M 90d PCB (Male - 90° PCB)
CP30072 AUDIO CONN AT-XLR-F 90d PCB (Female - 90° PCB)
CP30082 AUDIO CONN AT-XLR-F LATCHING 90d PCB (Female - 90° PCB with latch)
AIRTIGHT XLR RANGE
* For further information, contact [e-mail]
The airtight XLR is the latest XLR connector designed and made by Cliff UK.
It is an airtight connector, primarily intended for applications such as active
speakers, where it is detrimental to have air movement in and out of the enclosure.
The movement of the speaker diaphragm can cause air pressure changes. This air
can produce noise if leaked in and out of the enclosure via any small holes.
A gasket is supplied to seal the socket flange against the enclosure. The gasket
can be fitted on the front or rear of the XLR depending on preferred mounting.
3 mounting types available. Contacts are gold plated. Female versions is available
with a latch.
Rated Current: 3 Pin 5A. Nominal, 15A. Max.*
Rated Voltage: 250VAC Max.*