Datasheet

Pin No. Header Pin

1 Vcc 1

2 Data - 3

3 Data + 5

4 Ground 7

1 Vcc 2

2 Data - 4

3 Data + 6

4 Ground 8

Top USB

Bottom USB

USB Body

PART No WITH CSK HOLES FOR. C 30100 -P

FRONT MOUNTING

(AS SHOWN BELOW)

DUAL USB2 WITH EARTH

PART No WITH Ø2.5mm PLAIN. CP30100X -

HOLES FOR BACK MOUNTING

Dual USB2 & USB3.0 compliant sockets are mounted in a single space-saving universal XLR

receptacle, chosen to allow industry standard panel cutouts and maximum panel mounting density.

Output connection header pins are conﬁgured to facilitate either direct soldering to PCBs or

connection by header cable. We are happy to provide customers with standard or custom

designed header cables to meet individual system requirements.

Front or back mounted versions are available.

This is part of Cliff’s programmed series of USB and other data connectors, primarily in XLR and

other industry standard shells.

Enquire to Sales for customised USB connector variants to suit end users applications.

DUAL USB SOCKETS WITH EARTH IN XLR SHELL

CLIFF

DUAL USB2 WITH EARTH

PAGE 1
CLIFF DUAL USB SOCKETS WITH EARTH IN XLR SHELL Dual USB2 & USB3.0 compliant sockets are mounted in a single space-saving universal XLR receptacle, chosen to allow industry standard panel cutouts and maximum panel mounting density. Output connection header pins are conﬁgured to facilitate either direct soldering to PCBs or connection by header cable. We are happy to provide customers with standard or custom designed header cables to meet individual system requirements.
PAGE 2
DUAL USB3.0 WITH EARTH PART No. CP30105 - WITH CSK HOLES FOR FRONT MOUNTING PART No. CP30105X - WITH Ø2.5mm PLAIN HOLES FOR BACK MOUNTING (AS SHOWN BELOW) © CLIFF 4/17 ISS.2 For further information, contact sales@cliffuk.co.uk Cliff Electronic Components Limited, 76 Holmethorpe Avenue, Holmethorpe Ind. Estate, Redhill, Surrey RH1 2PF U.K. Tel: +44 (0)1737 771375 Fax: +44 (0)1737 766012 üRoHS www.cliffuk.co.