Datasheet

CLIFF
Drawings available on request. Contact [e-mail]
HANDLES
CH-1 Pocket Handle
CH-2 Large Cabinet Handle
Our range of handles is intended for use on wood, MDF, chipboard or metal enclosures.
Manufactured from a range of material including ABS, Glass Reinforced Nylon and PP,
they are designed to enhance the appearance and functionality of any equipment to which
they are fitted. Some parts can be custom branded.
CH-1 & CH-1A are for use on cabinets up to 19mm thick, or metal enclosures. For wood
use screw No. 6, and for metal use Ø4mm bolts or pop rivets. The support flange behind
the front upper face should ideally make contact with the top face of the cutout, so that all
the weight is not on the fixing screw. Standard colour black (PP).
CH-1A is much larger than CH-1.
Part No.
CH-1 - CL1910 Weight 9.8Kg./250 Part No. CH-1A - FCR6878 Weight 8Kg./100
CH-1A Pocket Handle
CH-2 is a heavy duty bar handle designed for use
on larger, heavier wood or metal cabinets. It
comprises a front and a back plate which snap
together. This two part assembly gives a
reduction in storage space compared to one-part
handles. The mounting flange is provided with a
moulded sealing rib which will give a good airtight
seal on cloth or plastic covered cabinets. For
watertight seal - use sealing compound under
flange. A moulded recess in the bar can
accommodate a name plate or logo.
Vertical / Horizontal Pull Strength (on 19mm.
chipboard cabinet) >300Kg
Fixing Screws - Select suitable length for cabinet,
with 90° head taper. 8 screws required.
Max Depth: 50mm.
Max Front Protrusion: 8.0mm.
Weight 17Kg./100 pcs.
Front Part No.
CL19122
Back Part No. CL19123
CH-1
CH-1A