Datasheet

For further information, contact [e-mail]
CLIFF
CABINET FEET
'TOP HAT' MOUNTING PLATE
CASTER CUP
This product is designed for fixing into the bottoms of
speaker cabinets, or lighting assemblies to enable these
enclosures to be mounted onto stands. Made from reinforced
nylon - they perform the same as metal, but are much lower
cost. Breaking strength >500Kg.
TH1 - CL19176 for 1
1
/
4
” (31.7mm.) diameter mounting posts.
TH2 - CL19177 for 1
1
/
8
” (28.6mm.) diameter mounting posts.
TH3 - CL19178 for 1
3
/
8
” (34.9mm.) diameter mounting posts.
TH4 - CL19179 for 1
1
/
2
” (38.1mm.) diameter mounting posts.
PF-1 (CL1914) Moulded plastic foot. Ø37mm. Tough and
durable. Fixing is by woodscrew size No. 8 or 10.
Standard colour black. Weight 7.2kg./1000
PF-1GFN (CL19145) Special heat resisting version used
for laboratory equipment.
RF-1 (CL1916) Same as PF-1 but made from synthetic
rubber, for non-slip applications. Weight 9.6kg./1000
PCB SPACERS - PCS Series
9 different sizes are available. These
give a rigid mounting for PCB’s or
similar assemblies. Fixing by self-
tapping screw size No.6 or 8, which
are screwed into each end of the
post. The centre flat section can be
gripped to prevent rotation while
fixing. Pop rivets
1
/
8
” Ø are suitable
for fixing to metal chassis.
TYPE LENGTH
PCS-025 ¼” (6.35mm)
PCS-05 ½” (12.5mm)
PCS-075 ¾” (19.0mm)
PCS-100 1” (25.4mm)
PCS-125 1¼” (31.7mm)
PCS-137 1
3
/
8
” (34.9mm)
PCS-150 1½” (38.1mm)
PCS-200 2” (50.8mm)
PCS-250 2½” (63.5mm)
Caster Cup is designed for use on stacking cabinet
systems which have casters fitted. The caster recess will
accept most wheels in common use. The cabinet should
be recessed just enough to clear the wheel recess, to give
best shock resistance. OEM logo can be applied.
Part No.
FCR68590 Weight 20Kg./1000