Datasheet

CLIFF
CABINET CORNERS
Interlocking Corners / Feet (For Stacking Cabinets)
CF-3
CF-3 is a low cost moulding designed for use on speaker and
amplifier cabinets. The design incorporates raised sections
which act as stand-off feet and interlock when identical size
cabinets are stacked on each other.
The 12mm. all round internal radius gives a snug wraparound fit
to completely conceal joints and avoid cloth finishing.
For use with 19mm. ply or chipboard enclosures.
Fixing by No.7 CSK screws. Weight 16.2Kg./1000
Part No.
CF-3 Corner - CL19170
CF-4
CF-4 is a more rugged version of CF-3 and can accommodate a
ribbed plastic extrusion, to provide a protective / decorative
edge on the top and bottom of the cabinet.
Fixing by No.7 CSK screws.
Supplied in Pairs - left and right hand fitting.
Extrusion supplied in 2 metre lengths.
Weight 30Kg./1000 (500 pairs) Extrusion 35Kg./100 mts.
Part No.
CF-4 Corner (Pair) - CL19173
Part No. CF-4 Extrusion - OD6562
CF-5
CF-5 extends the concept of CF-4 to allow a specially designed
extrusion to be used all round the edges of the cabinet. It
permits use of cabinets with square unfinished edges - thereby
reducing production costs. It has a rugged appearance and
gives good protection to the cabinet corners / edges.
Fixing by No.7 CSK screws. We suggest extrusion is fixed by
small nails or black staples on long runs. A small groove is
provided. Extrusion is supplied in 2 metre lengths.
Weight 25Kg./1000 Extrusion 18.5Kg./100 mts.
Part No.
CF-5 Corner - OD6595 CF-5 Extrusion - OD6596
CF-1 is a general purpose, tough cabinet corner. Its style
matches WCF-1 and together they can be used when making
wedge type speaker boxes. Weight 15Kg./1000
Part No.
CF-1 Corner - CL19169
CF-1
WCF-1
WCF-1 is a rugged corner designed especially for making
wedge type speaker boxes. It can be used with CF-1 which has
a similar matching styling. Weight 25.25Kg./1000
Part No. WCF-1 Corner - CL19172