CLIFF Optical Jacks The CLIFF ® range of Optical Transmitter and Receiver jacks feature seven different models that conform to the EIAJ standard CP-1201 for Digital Audio Interfaces including Fibre-Optical interconnections. Optical Jacks are virtually unaffected by noise when transmitting and receiving signals between digital audio equipment, enabling high-quality audio recording and high speed signal receiving. It continues to be adopted as a virtual standard in portable audio equipment.
CLIFF Optical Jacks OTJ-5/ORJ-5 Single Optical Transmitter and Receiver Jack. Right angle PCB mount with self tapping hole for panel mounting. Hinged shutter. PC LAYOUT OTJ-5 (FC684205T) ORJ-5 (FC684205R) OTJ-6/ORJ-6 Dual SPDIF RCA and Optical Transmitter and Receiver Jack. Right angle PCB mount with self tapping hole for panel mounting. Hinged shutter. Several different colored inserts available. PC LAYOUT OTJ-6 (FC684206T) ORJ-6 (FC684206R) OTJ-8/ORJ-8 Optical Transmitter and Receiver Jack.
P T~. SPECIAED ~lANCJ:oI.:I: 1 x c 1 0.15 e x e e 0.20 I' 0.30 ,
SPECIFICATIONS CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK OC08R-04-E SPECIFICATION NO. PAGE: 1 OF 11 FC684206R DATE: OCT.28.2003 Fiber optic receiving module for digital audio interface and navigation system. Features: (1) Conform to EIAJ standard CP-1201 (for Digital Audio interfaces Including Fiber Optical inter-connectors). (2) A self-tapping hole for easy attachment to Audio Equipments panels. (3) High speed signal receiving (12.5Mbps NRZ signal) 1.
SPECIFICATIONS SPECIFICATION NO. PAGE: 2 OF 11 DATE:OCT 28 2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK 3. Optical-electro Characteristics (Ta = 25℃, Vcc = 5V) Parameter Symbol Data Rate MIN. TYP. MAX. Unit. Conditions NRZ Code (2) 0.1 Using APF (3), Using Transmission Distance OC-0806T Pulse Width Distortion (4) ∆tw Pulse Width = 147ns Pulse Cycle = 294ns CL = 10pF Using OC-0806T - 0.2 5 - M -15 15 ns -14.
SPECIFICATIONS SPECIFICATION NO. PAGE: 3 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK Test Circuit Fiber optic cable Standard transmitter Receiver D Oscilloscope Input 13.
SPECIFICATIONS SPECIFICATION NO. PAGE: 4 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK 5. Application Circuit Fiber optic connector insertion side Fiber Optic Receiving Module 2 1 3 Less than 7 mm 0.1µF Vcc GND Vout ( Bottom View ) 6. Required Optical Fiber with Fiber Optic Connectors OC-0801P) REV.
SPECIFICATIONS SPECIFICATION NO. PAGE: 5 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK 7. Precautions on Use (1) Maximum rating The maximum ratings are the limit values which must not be exceeded during operation of device. None of these rating value must be exceeded. If the maximum rating value is exceeded, the characteristics of devices may never be restored properly. In extreme cases, the device may be permanently damaged.
SPECIFICATIONS SPECIFICATION NO. PAGE: 6 OF 11 DATE: OCT.28.2003 OPTICAL RECEIVING JACK OC806R FC684206R CUSTOMER MODEL NO. / TITLE (4) Vibration and shock This module is plastic sealed and has its wire fixed by resin. This structure is relatively resistant to vibration and shock. In actual equipment, there are sometime cases in which vibration, shock, or stress is applied to soldered parts or connected parts, resulting in lines cut.
SPECIFICATIONS SPECIFICATION NO. PAGE: 7 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK (13) Precautions when disposing of devices and packing materials. When disposing devices and packing materials, follow the procedures stipulated by local regulations in order to protect the environment against contamination. (14) Precautions during use CLIFF TW is continually working to improve the quality and the reliability of their products.
SPECIFICATIONS SPECIFICATION NO. PAGE: 8 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK RCA 1. Scope This specification covers the requirements for “PIN JACK”. 2. Rated A) Rated voltage DC/AC 34V B) Rated current DC/AC 2A C) Temperature range -25~70℃ D) Humidity range 85% RH MAX. E) Test condition Unless otherwise specified herein, all measurements and tests shall be made at temperature of 5℃~35℃ and relative humidity of 45%~85%. 3.
SPECIFICATIONS SPECIFICATION NO. PAGE: 9 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK 4. Mechanical efficiency Item 4A)Insertion force and Withdrawal force Insertion force Condition (With the gauge plug as show in 8) Initial After humidity test After heat test After cold test After resistance to soldering test After life test After temperature cycling test Withdrawal force 0. 3kgf~4.0kgf (2.94N~39.
SPECIFICATIONS SPECIFICATION NO. PAGE: 10 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK 6. Environmental test 6A) Life test The life test shall consist of 150 cycles of insertion and withdrawal with gauge plug covered with a thin coat of grease in order to prevent from heating or wearing, at a rate of 20 to 30 cycles per minute under no load. At the conclusion of this test, the jack shall comply with Paragraphs 3 & 4, and be in operating condition.
SPECIFICATIONS SPECIFICATION NO. PAGE: 11 OF 11 DATE: OCT.28.2003 FC684206R CUSTOMER MODEL NO. / TITLE OPTICAL RECEIVING JACK 6G) Soldering test Area of soldering shall be capable of 95% or more of dip terminal area. Condition: Terminal of solder: 235±5℃; Time of dip:5±0.5 sec. Length of dip: 2±0.5mm (from top of terminal) 7. Others When the amendment of this specification comes into necessity, it shall be made by the mutual consultation and agreement between manufacturer and customer. 8.
Document No. 01-E Document name Management standards for “Environment-related substances to be controlled” Rev. DATE 1.6 OCT,26,2006 1. This part should not contain any substances which are specified in follow .(Except cadmium is less than 5ppm, Lead is under 90ppm) 2. In this case, pre-processing methods and measurement methods shall conform to ROHS. 3.
E56070 Wednesday, August 29, 2001 QMFZ2 Component - Plastics CHI MEI CORPORATION 59-1 SAN CHIA JEN TE TAINAN HSIEN TAIWAN Material Designation: PA-765A (+) Product Description: Acrylonitrile Butadiene Styrene (ABS), designated "Polylac" furnished as pellets. Color Min. Thick. (mm) Flame Class HWI ALL 1.5 V-1 - - 85 80 85 - - 2.1 V-0, 5V-B 3 0 85 80 85 - - 2.5 5VA - 0 85 80 85 - - 3.
E56070 Monday, December 14, 1998 QMFZ2 Component - Plastics CHI MEI CORPORATION 59-1 SAN CHIA JEN TE TAINAN HSIEN TAIWAN Material Designation: PA-777D Product Description: Acrylonitrile Butadiene Styrene/Phenyl Maleimide (ABS/PMI), designated "Polylac" furnished as pellets. Color Min. Thick. (mm) Flame Class HWI ALL 1.
E41938 Thursday, January 16, 2003 QMFZ2 Component - Plastics E I DUPONT DE NEMOURS & CO INC ENGINEERING POLYMERS CHESTNUT RUN PLAZA PO BOX 80713 WILMINGTON DE 19880 Material Designation: 70G33L(+) Product Description: Polyamide 66 (PA66), glass reinforced, designated "Zytel" furnished as pellets. Color Min. Thick. (mm) Flame Class HWI HAI RTI Elec RTI Imp RTI Str IEC GWIT ALL 0.71 HB 4 0 130 120 130 1.5 HB 4 0 130 120 130 - IEC GWFI - 3.