AMX38 Owner's Manual Rev.
AMX38 Owner's Manual Rev.
Standard Features of AMX38 System þ 5-Year Warranty — Prime Security guarantees the operation of the control unit and remote controls for five full years from the date of purchase (see the enclosed warranty card for details). þ Two AviGlo 4-Button/9-Channel Remote Controls — Designed for easy fingertip control, these 4-button remotes allow you to operate your car’s power door locks as well as optional accessories from up to 100 feet away.
þ Instant Remote Control Code Deletion — Removes the code of a lost or stolen remote so it can no longer control your system. (See "Programming Table for Remote Controls" on page 9.) þ Electronic Scan Prevention (ESP) — Some thieves use digital code "scanners" that rapidly transmit one remote control code after another until they hit the one code that activates the unlock function of a keyless entry system.
þ Protected Valet Mode —If you have the Passive Lock and Passive Starter Disable features turned on, Valet Mode temporarily overrides these feature so you can have your car washed, serviced or valet parked without giving up your remote control. You can put the system in Valet Mode via a flick of a hidden switch. Just repeat the action to return the system to its normal operating mode.
Operating Your AMX38 System Remote Controls Included with your system are two AviGlo™ 4-button/9-channel remote controls. Once exposed to light, the AviGlo remote control buttons will glow, making the buttons visible in the dark. Your remote control (remote) is a miniature transmitter powered by a small +12 volt battery. Obstructions, electrical or radio interference, weather conditions, window tint or a weak battery can reduce this range.
User-Programmable Passive Starter Disable If the optional starter disable relay was added, your system can be programmed to automatically disable the starter 30 seconds after the ignition key is turned "OFF." (See "Programming Table for System Features" on page 8.) 1. Turn the ignition key to the "OFF" position. 2. The LED will flash rapidly for 30 seconds. 3. The LED will then flash slowly to indicate the starter has been disabled.
User Programmable Illuminated Exit The system can be programmed to turn on the interior lights for 30 seconds after the ignition key has been turned "OFF." Turning the ignition key "ON" or remotely locking the doors will turn off the interior lights. (See "Programming Table for System Features" on page 8.) Remote-Controlled Trunk Release Press the remote control TRUNK button for 1-2 seconds. The trunk will unlatch (pop open).
To Turn OFF Protected Valet Mode 1. Turn your ignition key to the "ON" position or start the engine. 2. Flick the valet switch to the "OFF" position. 3. The LED will turn off to indicate the system is no longer in Protected Valet Mode. 4. Turn the ignition key to the "OFF" position. LED Status Off System is disarmed On solid In Protected Valet Mode Slow flash System is armed Rapid flash Passive arming 7 AMX38 Owner's Manual Rev.
User-Programmable Features All system and remote control programmable features are accomplished by turning the ignition key "ON" (or starting the engine) and flicking the valet switch on and off a preset number of times. The system also allows you to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote control functions. 1. Remove the system from Protected Valet Mode.
Programming Table for Remote Controls Feature Factory Setting # of Beeps Secondary Action Door Lock LOCK Button 14 Press the LOCK button. The system will beep once for learned confirmation. Door Unlock UNLOCK Button 15 Press the UNLOCK button. The system will beep twice for learned confirmation. Trunk Release Output TRUNK Button 16 Press the TRUNK button. The system will beep 3 times for learned confirmation. Accessory Output OPTION Button 17 Press the OPTION button.
© 1999 Prime Security Part Number: 32-5013 Rev. A AMX38 Owner's Manual Rev.