Owner`s manual

User-Programmable Features
User-Programmable Features (1 Chirp = OFF, 2 Chirps = ON)
Fea ture
Select
Unmarked 1 Unmarked 2 Unmarked 3 Unmarked 4
✱ 1
AutoProgram New Master
Remote NOTE 1
Chirps
(Off/LoudChirps/QuietChirps)
(1 chirp/2 chirps/3 chirps)
AutoArming
(On/Off)
Arm/Disarm with
Secondary Remote
NOTE 5
✱ 2 NOT USED NOT USED
AutoArm & Lock
(On/Off)
Boot Release with
Secondary Remote
NOTE 6
✱ 3 NOT USED
Remote Valet Feature
(On/Off)
NOT USED
Silent Arm/Disarm with
Secondary Remote
NOTE 6
✱ 4 NOT USED
AutoStart using optional IntelliStart 4*
(Both/Neither/Battery/Temperature)
(1 chirp/2 chirps/3 chirps/4 chirps)
NOTE 3
FACT
(Off/On)
Remote Start with
Secondary Remote
NOTE 6
✱ 5
AutoLock
(Off/Instant/RPM-Dependent)
(1 chirp/2 chirps/3 chirps)
BlackJax
(Off/On)
NOT USED
Timed Headlights with
Secondary Remote
NOTE 6
✱ 6
AutoUnlock
(Off/On)
Clear All Remotes
NOTE 4
NOT USED
Window Rolldown/Venting
with Secondary Remote
NOTE 6
✱ 7
Re set All to Fac tory Set tings
(ex cept re mote controls and
valet code)
NOTE 2
Valet Code
SHOULD ONLY BE PROGRAMMED
BY THE VEHICLE OWNER
NOT USED
Remote Valet Mode
with Secondary Remote
NOTE 6
*IntelliStart 4 not evaluated by
Thatcham
n
NOTE 1: Press button 1 on the 16-channel master remote, you will hear one chirp. Press button 1 again , you will hear two
chirps.
n
NOTE 2: You will hear two chirps when all features are reset.
n
NOTE 3: With each chirp confirmation the lights will flash two times, except for the one confirmation chir p for the “Both”
setting.
n
NOTE 4: When you hear two chirps, all remote controls will have been erased from the system memory. You mu st now add
the new and/or existing remote controls to the system (i.e., AutoProgram each remote that will be u sed with the Concept
600).
n
NOTE 5: Programs either a 4-channel secondary, 16-channel master, or any remote control from another Conce pt system to
arm or disarm the vehicle. For instance, to set button 13 of the other car’s master remote control to arm/disarm the system,
select column 4, row 1, then transmit channel 13 from the remote you are programming. The system wi ll respond with one
chirp. Immediately transmit channel 13 again. The system will respond with two chirps. Button 13 of the other vehicle’s
remote will now arm/disarm the system.
n
NOTE 6: This feature can be programmed onto the remote control of another Concept system, after that remot e has been
programmed to arm/disarm this system. Select the row and column number, then transmit the unused bu tton on the other
remote that you want to use to perform that function. The Concept 600 will respond with the same nu mber of chirps as the
row number. Please note that you must first set a button on the remote that will arm/disarm the sys tem (column 4, row 1)
before these others will be accepted.
14 Con cept 600/299