Instructions / Assembly

Figure(I)
WALL MOUNTED INSTALLATION
Due to many different materials used on different walls, it is highly recommended that you consult
your local builder before you install this appliance on the wall.
STEP 1 Select a location that is not prone to moisture and is located at least 36"(914mm) away from
combustible materials such as curtain drapes, furniture, bedding, paper, etc.
STEP 2 Have two people hold the appliance against the wall to determine the final location.
STEP 3 Place unit face down on a soft, non abrasive surface. Remove the bracket from the back of
the unit by removing the screws. Figure(a) Remove four pieces of silver screws on both sides.
Figure(b)
Figure(a)