Instructions / Assembly

LOG-SET/CRYSTAL EMBER INSTALLATION
(Note: Please make the installation according to the embers which you bought or selected.)
* Glass front must be removed and the appliance must be mounted in its final location before the log-
set/crystal embers are installed.
* If your fireplace come with log-set, remove the log-set from the package, put it to the fireplace
designed place. Figure 1
* If your fireplace come with CLEAN CRYSTAL MEDIA: crystal may have a fine oil residue that
needs to be cleaned prior to installation. Clean them with mild dish soap, drain, rinse thoroughly and
dry before placing into the tray.
* Then place the crystal embers carefully into the bottom tray on the front of the appliance as
illustrated. Apply an even layer from side to side. Figure 1