Use and Care Manual
Page 9
KKB
A
AA
7.
-
semble the outer rim using one small screw (LL)
and one cap nut (KK). Repeat this step with the
three M6 screws (AA) and three cap nuts (KK).
Tighten all screws tightly.
!!!gggnnniiilllbbbmmmeeesss
WARNING
8.
ers (HH) and three wing nuts (GG).
9. Unscrew the four screws that are preas-
sembled on the head assembly (C). Place the
head assembly (C) into the top of the post (D) by
inserting the regulator (H) into the post (D).
Tightly fasten the previously removed screws
back into the head assembly (C) through the
slots at the top of the post (D).
C
CH
D
FF
HH
GG