Use and Care Manual
01/07
ASSEMBLY INSTRUCTION
U SHAPE
Notice
1. 50% Tighten before fixings all screws, Allen wrench is
recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make
sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during
assembly, please loosen all all the other screws to
50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws,
adjust it on a flat ground and tighten up all screws
again.
6. Note: If one or more screws are fully tightened
during assembly, chances are the others will not be
aligned with holes. In addition, all the holes are
disigned to be relatively larger to provide more space
for the adjustment of the screws.
WF285661; WF285662; WF285663