Operation Manual
2.
Attach the window slider kit to the window stool.
Adjust the length of the window slider kit according
Window
Adjust
the
length
of
the
wind
ow
slider
kit
according
to the width of window, shorten the adjustable window
Window
kit
to the width of window, shorten the adjustable window
panel
kit if the width of window is less than 26.5 inches. Open
kit if the width of window is less than 26.5
inches. Open
the
window
sash
and
place
the
window
slider
kit
on
the window sash and place the window slider kit on the
26.5
~
48.0
the
window
stool.
See
Fig.13.
window stool. See Fig.9.
INSTALLATION
INSTRUCTIONS
(optional)
INSTALLATION INSTRUCTIONS
(optional)
Foam seal A
(adhesive type)
Fig.8
Installation in a double-hung sash
window
1. Cut the foam seal(adhesive type) to the proper
length and attach it to the window stool. Fig.8
Foam seal A
(adhesive type)
Fig.12
Installation in a sliding
sash
window
1. Cut the foam seal(adhesive type) to the proper
length and attach it to the window frame,Fig.12.
2. Attach the window slider kit to the window stool.
26.5 ~ 48.0
or
26.5 ~ 48.0
Window stool
Window kit
Window stool
Fig.9
3. Cut the foam seal(adhesive type) to the proper
length and attach it on the top of the window. Shown
as in Fig.10.
4. Close the window sash securely against the
window.
5. Cut the foam seal to an appropriate length and
seal the open gap between the top window sash
and outer window sash. Shown as in Fig.11.
or
Window
panel
26.5 ~ 48.0
Fig.13
3. Cut the foam seal(adhesive type) to the proper
length and attach it on the top of the window.
Shown as in Fig.14.
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and
seal the open gap between the top window sash
and outer window sash. Shown as in Fig.15.
Window kit
or
or
Window stool
Foam seal
Window kit
Window stool
Fig.10
Fig.14
Foam seal
Fig.11
Fig.15
10
11