Specifications
GT-PCS Split Units - 60Hz Puron
®
Created: 29 Aug., 2013
8
Water Connections
The TTS models utilize swivel piping fi ttings for water
connections that are rated for 450 psi (3101 kPa) operating
pressure. The connections have a rubber gasket seal similar
to a garden hose gasket, which when mated to the fl ush
end of most 1” threaded male pipe fi ttings provides a leak-
free seal without the need for thread sealing tape or joint
compound. Check for burrs and ensure that the rubber seal
is in the swivel connector prior to attempting any connection
(rubber seals are shipped attached to the swivel connector).
DO NOT OVER TIGHTEN or leaks may occur.
The female locking ring is threaded onto the pipe threads
which holds the male pipe end against the rubber gasket,
and seals the joint. HAND TIGHTEN ONLY! DO NOT
OVERTIGHTEN!
Installation
Gasket
Swivel Nut
Stainless steel
snap ring
Brass Adaptor
Hand Tighten
Only!
Do Not
Overtighten!
%RWWRP9LHZ
RI8QLW
µ[µ
[FP
([LVWLQJ3DGODUJHUWKDQ[>[FP@
µ
>FP@
µ
>FP@
µ
>FP@
µ>FP@
Air Pad With
Access Hole
Stainless
Steel
Braided
Connecting
Hoses
NOTE: Outdoor Unit Water Connections
50YGP026 and 038 units are shipped with ¾” stainless steel
braided hoses connected to unit piping.
50YGP049 and 064 units are shipped with 1” stainless steel
braided hoses connected to unit piping.
Figure 1: 50YGS Installation
Figure 2: Water Connections (50YGS Series)
Figure 3: 50YGP Installation