Specifications
ClimateMaster works continually to improve its products. As a result, the design and specifi cations of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specifi c information on the current design and specifi cations. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
Page ______ of ______Rev.: 29 May, 2009BLC105 - 35
VHS Series 60Hz - R22 Submittal Data Eng/I-P
Geothermal Heat Pump Systems
VHS Unit Dimensions
Master Unit, Furred In Cabinet
(88 in. [2235mm] Height)
A
A
Thin wall Conduit
3/4" (19)
88”*
(2235)
9.88"
(251)
5.75” (146)
5.75” (146)
6"
(152)
2"
(51)
3"
(76)
33.50”*
(851)
49.50"
(1257)
Floor to floor + 2” (51) (Max. 115” (2921)
Supply Air Opening
1/2" (13) Collar
Optional 24V Surface Mount T/Stat
Note 5
Upper Control Box & Electrical
Power Connections
Motor-Blower Assembly
Ball Valves (2)
Filter, Throwaway
Return Air Opening
Heat Pump
Chassis
Factory Trapped
Condensate Drain
Lower Drain Pan
Condensate Drain
Riser
Supply Riser
Optional
Top Duct
Connection
1/2" (13)
Collar
Air coil
Supply Riser
Condensate
Drain Riser
(Insulated)
Return Riser
Riser
Tailpiece
Optional
Remote
T/Stat
Conduit
Power
Conduit
Optional motorized
water valve or auto
flow regulator valve
4"
(102)
* For optional 80” (2032) tall cabinet deduct
8” (203) from dimensions.
Note: May limit front supply opening size.
3.50” (89)
Return Riser
Flex Hose
Upper Block off not shown
B
A
Service
Area
2.00(51)
B
Condensate
Drain Stubout
3” (76)
3” (76)
Supply and Ret
u
Stubouts
Note: All measurements are in inches, millimeters are in parenthesis.
The riser compartment is defi ned as being the rear of each unit.
Supply air grilles and return air/access panel can be any side except rear.
Must provide crossover water piping from Master to Slave unit.
Master unit has no riser chase.
** C Dimension = 4 1/4" (92) for risers up to 2 1/2" (64) diameter.
Consult factory for larger diameter risers.
Unit Size A B C**
816-10
17 [432] 10 [254] 4-1/4 [92]
816-15
17 [432] 10 [254] 4-1/4 [92]
816-20
20 [508] 13 [330] 4-1/4 [92]
816-28
24 [610] 17 [432] 4-1/4 [92]
816-30
24 [610] 17 [432] 4-1/4 [92]
816-36
24 [610] 17 [432] 4-1/4 [92]