Owner`s manual

C
LIMATE
R
IGHT
REMOTE CONTROL
5
-
1
C l i m a t e C o m f o r t A n y p l a c e I m a g i n a b l e
5. REMOTE CONTROL
INSTALLING BATTERIES
To Insert the Batteries in the Remote Control:
1. Remove the battery cover by sliding it according to the arrow
direction.
2. Insert two new AAA alkaline batteries, matching the (+) and (–)
of the battery to the orientation in the battery compartment.
3. Reattach the cover by sliding it back into position.
Important Notes:
· Remove the batteries from the remote control if the system is
not going to be used for an extended period of time.
· This is an IR (Infrared) remote and requires line of sight to
control the unit. Make sure there are no obstructions between
the remote and signal receiver located on the display panel of
the unit.
· The ClimateRight Unit operates exclusively through the remote
control. There are no push button controls on the unit.
· If the remote control is lost, please contact ClimateRight® to
order a replacement.
5
-
2
I/O
B
UTTON
(O
N
/O
FF
)
C l i m a
t e C o m f o r t A n y p l a c e I m a g i n a b l e
I/O BUTTON (ON/OFF)
Starts or Stops the Unit
MODE BUTTON
Selects the functions of the unit for:
a. Fan Mode
b. Air Conditioning Mode
c. Heating Mode
d. Dehumidifying Mode (Dry)
e. Auto Mode
FAN BUTTON
a. High
b. Medium
c. Low
d. Auto
TEMPERATURE [+/-]
Select the desired temperature by pressing either + or – key when
using the unit in cooling, heating or Auto function. The LCD will
display the desired temperature during the setting. The LCD
displays room temperature when it is not at temperature setting
mode.
The LCD display either in Celsius or Fahrenheit. Press the
temperature + and – keys simultaneously to change the display
from Celsius to Fahrenheit and vice versa.