Instruction manual

21INSTRUCTION MANUAL
>> HUMIDIFY SETPOINT: Allows you to increase and maintain the relative humidity
at a specific setpoint. Once you choose HUMIDIFY follow these easy steps:
:: The HUM setpoint with - and + icons allow you to lower and raise your setpoint.
* Example of the typical use of the Humidify Function: If the current humidity is 30% your
Climatouch
™
thermostat will initiate the humidifier to function until Setpoint 50% is
reached. In order to humidify you must set the humidity setpoint above the current
humidity.
HUMIDIFY AND HUMIDITY SETPOINT
20 Climatouch
™
CT0-7TC-32H
DE-HUMIDIFY AND HUMIDITY SETPOINT
>> DE-HUMIDIFY SETPOINT: Allows you to reduce and maintain the relative humidity
at a specific setpoint.
>> Please note that this feature functions in the COOL Mode only. Your Climatouch
™
Thermostat must be configured to control a cooling unit such as an air conditioner
of heat pump. Once you choose De-Humidify follow these easy steps:
:: The DH SETPOINT with - and + icons allow you to lower and raise your setpoint
* Example of typical use of the De-Humidify function: In order to de-humidify you must
set the de-humidify setpoint below the current relative humidity. Your Climatouch
™
will
both lower and regulate temperature to the cooling setpoint while monitoring and
lowering the room humidity.
Since the De-Humidify feature uses the COOL Function of your Air Conditioner or
Heat Pump, your Climatouch
™
thermostat will turn off the air conditioning if either the
dehumidifier setpoint or temperature setpoint is reached - which ever comes first.