System information

C0240111-06-07-GB
24
ALARM DESCRIPTION details RESET
363
Compressor 3 compression ratio “as above, for compressor 3” A/M
364
Compressor 4 compression ratio “as above, for compressor 4” A/M
371
Compressor 1 bearings
Compressor 1 bearings faulty (only for units with
centrifuge compressors)
A/M
372
Compressor 2 bearings “as above, for compressor 2” A/M
373
Compressor 3 bearings “as above, for compressor 3” A/M
374
Compressor 4 bearings “as above, for compressor 4” A/M
381
Compressor 1 SCR temperature
Compressor 1 SCR temperature over max. (only
for units with centrifuge compressors)
A/M
382
Compressor 2 SCR temperature “as above, for compressor 2” A/M
383
Compressor 3 SCR temperature “as above, for compressor 3” A/M
384
Compressor 4 SCR temperature “as above, for compressor 4” A/M
391
Compressor 1 rotor block
Compressor 1 blocked (only for units with
centrifuge compressors)
A/M
392
Compressor 2 rotor block “as above, for compressor 2” A/M
393
Compressor 3 rotor block “as above, for compressor 3” A/M
394
Compressor 4 rotor block “as above, for compressor 4” A/M
400
Probe 10 error
Probe 10 error. Values read by probe 10 out of
range.
A
401
Probe 1 error “analogue, as above” A
402
Probe 2 error “analogue, as above” A
403
Probe 3 error “analogue, as above” A
404
Probe 4 error “analogue, as above” A
405
Probe 5 error “analogue, as above” A
406
Probe 6 error “analogue, as above” A
407
Probe 7 error “analogue, as above” A
408
Probe 8 error “analogue, as above” A
409
Probe 9 error “analogue, as above” A
411
Exp 1 Probe 1 error Probe 1, expansion 1 fault A
412
Exp 1 Probe 2 error “analogue, as above” A
413
Exp 1 Probe 3 error “analogue, as above” A
414
Exp 1 Probe 4 error “analogue, as above” A
421
Exp 2 Probe 1 error “analogue, as above” A
422
Exp 2 Probe 2 error “analogue, as above” A
423
Exp 2 Probe 3 error “analogue, as above” A
424
Exp 2 Probe 4 error “analogue, as above” A
425
Exp 2 Probe 5 error “analogue, as above” A
426
Exp 2 Probe 6 error “analogue, as above” A
427
Exp 2 Probe 7 error “analogue, as above” A
428
Exp 2 Probe 8 error “analogue, as above” A
431
Exp 3 Probe 1 error “analogue, as above” A
432
Exp 3 Probe 2 error “analogue, as above” A
433
Exp 3 Probe 3 error “analogue, as above” A
434
Exp 3 Probe 4 error “analogue, as above” A
451
Exp 5 Probe 1 error “analogue, as above” A
452
Exp 5 Probe 2 error “analogue, as above” A
453
Exp 5 Probe 3 error “analogue, as above” A
454
Exp 5 Probe 4 error “analogue, as above” A
500
Probe 10 error slave
Slave probe 10 faulty - only in units with more
than 2 circuits
A
501
Probe 1 error slave “analogue, as above” A
502
Probe 2 error slave “analogue, as above” A
503
Probe 3 error slave “analogue, as above” A
504
Probe 4 error slave “analogue, as above” A
505
Probe 5 error slave “analogue, as above” A
506
Probe 6 error slave “analogue, as above” A
507
Probe 7 error slave “analogue, as above” A
508
Probe 8 error slave “analogue, as above” A
509
Probe 9 error slave “analogue, as above” A
511
Exp 1 Probe 1 error slave Probe 1, expansion 1, connected to slave faulty A
512
Exp 1 Probe 2 error slave “analogue, as above” A
513
Exp 1 Probe 3 error slave “analogue, as above” A
514
Exp 1 Probe 4 error slave “analogue, as above” A
521
Exp 2 Probe 1 error slave “analogue, as above” A