System information

C0240111-06-07-GB
37
Mask Description Para n°
Master calibration
offset Value
B9: 0.0°C 00.0°C
B10: - -
Modifies the probe offsets. (Only present if required by the type of machine configured)
The word "master" only appears on units with more than 2 circuits.
27.09
27.10
Master calibr. exp1
offset Value
B1: 0.0°C 35.6°C
B2: 0.0°C 40.5°C
Modifies the probe offsets of expansion 1. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.11
27.12
Master calibr. exp1
offset Value
B3: 0.0°C 37.2°C
B4: 0.0°C 37.2°C
Modifies the probe offsets of expansion 1. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.13
27.14
Master calibr. exp2
offset Value
B1: 0.0bar 04.2bar
B2: 0.0bar 03.9bar
Modifies the probe offsets of expansion 2. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.21
27.22
Master calibr. exp2
offset Value
B3: 0.0°C 35.6°C
B4: 0.0°C 40.5°C
Modifies the probe offsets of expansion 2. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.23
27.24
Master calibr. exp2
offset Value
B5: 0.0°C 22.3°C
B6: 0.0°C 24.2°C
Modifies the probe offsets of expansion 2. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.25
27.26
Master calibr. exp2
offset Value
B7: 0.0°C 22.4°C
B8: - -
Modifies the probe offsets of expansion 2. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.27
27.28
Master calibr. exp3
offset Value
B1: 0.0°C 05.3°C
B2: 0.0°C 00.0°C
Modifies the probe offsets of expansion 3. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.31
27.32
Master calibr. exp3
offset Value
B3: 0.0°C 00.0°C
B4: 0.0°C 00.0°C
Modifies the probe offsets of expansion 3. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.33
27.34
Master calibr. exp5
offset Value
B1: 0.0°C 00.0°C
B2: 0.0°C 00.0°C
Modifies the probe offsets of expansion 5. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.51
27.52
Master calibr. exp5
offset Value
B3: 0.0°C 00.0°C
B4: 0.0°C 00.0°C
Modifies the probe offsets of expansion 5. (Only present if required by the type of machine
configured)
The word "master" only appears on units with more than 2 circuits.
27.53
27.54
Slave calibration
offset Value
B1: 0.0bar 07.3bar
B2: 0.0°C 12.3°C
Modifies the probe offsets. (Only present if required by the type of machine configured). 31.01
31.02
Slave calibration
offset Value
B3: 0.0°C 12.3°C
B4: 0.0°C 12.3°C
Modifies the probe offsets. (Only present if required by the type of machine configured) 31.03
31.04
Slave calibration
offset Value
B5: 0.0°C 12.3°C
B6: 0.0°C 07.3bar
Modifies the probe offsets. (Only present if required by the type of machine configured) 31.05
31.06
Slave calibration
offset Value
B7: 0.0°C 05.3°C
B8: - -
Modifies the probe offsets. (Only present if required by the type of machine configured) 31.07
31.08
Slave calibration
offset Value
B9: 0.0°C 00.0°C
B10: - -
Modifies the probe offsets. (Only present if required by the type of machine configured) 31.09
31.10
Slave calibr. exp1
offset Value
B1: 0.0°C 35.6°C
B2: 0.0°C 40.5°C
Modifies the probe offsets of expansion 1. (Only present if required by the type of machine
configured)
31.11
31.12
Slave calibr. exp1
offset Value
B3: 0.0°C 37.2°C
B4: 0.0°C 37.2°C
Modifies the probe offsets of expansion 1. (Only present if required by the type of machine
configured)
31.13
31.14
Slave calibr. exp2
offset Value
B1: 0.0bar 04.2bar
B2: 0.0bar 03.9bar
Modifies the probe offsets of expansion 2. (Only present if required by the type of machine
configured)
31.21
31.22
Slave calibr. exp2
offset Value
B3: 0.0°C 35.6°C
B4: 0.0°C 40.5°C
Modifies the probe offsets of expansion 2. (Only present if required by the type of machine
configured)
31.23
31.24