System information

C0240111-06-07-GB
40
Mask Description Para n°
Analogue outputs:
Cond. 3 adj.:000 %
Cond. 4 adj.:000 %
Displays analogue outputs 1 and 2 of the slave board. Shows the percentage of demand of
the devices connected to it (for non-linear devices correspondence with supplied voltage V
does not apply). Compares Cond. 3-4 adj. with single or dual ventilation adjustment.
Analogue outputs:
--- %
--- %
Displays analogue outputs 3 and 4 of the slave.
Analogue outputs:
--- %
--- %
Displays analogue outputs 5 and 6 of the slave.
Analogue outputs: 3
Freecooling :000 %
Displays analogue outputs 1 and 2 of slave expansion 3.
Hour counter
Pump 1 000000
Pump 2 000000
Displays the operating hours of the circulation pump (pump 2 appears only if two pumps are
enabled).
Compr. hour counter
Av. hrs 000000
C1 000000 C2 000000
C3 000000 C4 000000
Displays average compressor hours.
Displays the operating hours of compressors 1, 2, 3 and 4.
Comp.1 Work
Req 078 << 082 Act
082% 32450rpm
CR 02.82
Displays the operating status of the centrifuge compressors, the request and effective
activation, the rpm and the percentage delivered.
outlet temp 78.5°C
lp 03.9bar
Displays other data relative to the centrifuge compressors, such as outlet temperature and
inlet pressure
Comp.2 Work
Req 075 << 080 Act
080% 29500rpm
CR 02.84
Displays the operating status of the centrifuge compressors, the request and effective
activation, the rpm and the percentage delivered.
outlet temp 78.5°C
lp 03.9bar
Displays other data relative to the centrifuge compressors, such as outlet temperature and
inlet pressure
Comp.3 Work
Req 076 << 082 Act
082% 33600rpm
CR 02.86
Displays the operating status of the centrifuge compressors, the request and effective
activation, the rpm and the percentage delivered.
outlet temp 78.5°C
lp 03.9bar
Displays other data relative to the centrifuge compressors, such as outlet temperature and
inlet pressure
Comp.4 Work
Req 078 << 081 Act
081% 30250rpm
CR 02.83
Displays the operating status of the centrifuge compressors, the request and effective
activation, the rpm and the percentage delivered.
outlet temp 78.5°C
lp 03.9bar
Displays other data relative to the centrifuge compressors, such as outlet temperature and
inlet pressure
subc 03.8 03.6
st Off Off
step 0000 0000
Displays the subcooling value of circuits, the status of the electronic thermostat valve drivers
and the number of valve aperture steps
Enable
circuits
Circ1: Y Circ2: Y
Circ3: N Circ4: N
Selects/deselects circuits. 47.01
47.02
47.03
47.04
Enable
compressors
C1:Y C2:Y C3:Y C4:Y
Selects/deselects compressors. 47.05
47.06
47.07
47.08
W 3000
Code CA 15.00 GB 
This mask contains the reference information of the software [Code].
The closed padlock symbol shows that the board is provided with its propriety software; two
padlocks appear on units with 3 or 4 circuits
Setpoint
← ↓
Access mask to setpoint menu.
Press "Up" or "Down" to scroll the other masks and "Esc" to
return to the submenu.