System information
C0240111-06-07-GB
43
Mask Description Para n°
An. In. master exp4
N° Value
3 A
4 A
Displays analogue inputs 3 and 4 of expansion 4 (if present).
Master is only specified on units with 3 or 4 circuits.
Dig.In. master exp5
12345 67890 12345
CCCCC CCCCC CCCCC
CCC
Displays the state of the digital inputs of expansion 5 (if present) and specifies their state.
C: Contact closed
A: Contact open
Master is only specified on units with 3 or 4 circuits.
Dig.Out. master exp5
12345 67890 12345
AAAAA AAAAA AAAAA
AAAAA AAAAA AAAA
Displays the state of the digital outputs of expansion 5 (if present) and specifies their state.
C: Contact closed
A: Contact open
Master is only specified on units with 3 or 4 circuits.
An. In. master exp5
N° Value
1 00.0 °C
2 00.0 °C
Displays analogue inputs 1 and 2 of expansion 5 (if present).
Master is only specified on units with 3 or 4 circuits.
An. In. master exp5
N° Value
3 00.0 °C
4 00.0 °C
Displays analogue inputs 3 and 4 of expansion 5 (if present).
Master is only specified on units with 3 or 4 circuits.
Dig.In. slave
12345 67890 12345
CCCCC CCCCC CCCCC
CCC
Displays the state of the digital inputs and specifies their state.
C: Contact closed
A: Contact open
The number of inputs displayed depends on the type of unit. (the figures on the second row
are for reference purposes)
Dig.Out. slave
12345 67890 12345
AAAAA AAAAA AAAAA
AAAAA AAAAA AAAA
Displays the state of the digital outputs and specifies their state.
C: Contact closed
A: Contact open
The number of outputs displayed depends on the type of unit. (the figures on the second row
are for reference purposes)
An. In. slave
N° Value
1 07.3 bar
2 12.3 °C
Display of analogue inputs 1 and 2.
An. In. slave
N° Value
3 12.3 °C
4 12.3 °C
Display of analogue inputs 3 and 4.
An. In. slave
N° Value
5 12.3 °C
6 07.3 bar
Display of analogue inputs 5 and 6.
An. In. slave
N° Value
7 05.3 °C
8 00.0
Display of analogue inputs 7 and 8.
An. In. slave
N° Value
9 00.0 °C
10 A
Display of analogue inputs 9 and 10.
An. Out. slave
N° Value
1 00.0 V
2 00.0 V
Voltage applied to analogue outputs 1 and 2.
An. Out. slave
N° Value
3 00.0 V
4 00.0 V
Voltage applied to analogue outputs 3 and 4.
An. Out. slave
N° Value
5 00.0 V
6 00.0 V
Voltage applied to analogue outputs 5 and 6.
Slaves required
Exp.1: Y Exp.2: N
Exp.3: Y Exp.4: N
Exp.5: N
Mask indicating the address for the slave expansion boards. This changes depending on the
parameter settings.
Master is only specified on units with 3 or 4 circuits.
Slaves on-line
Exp.1: Y Exp.2: N
Exp.3: Y Exp.4: N
Exp.5: N
Mask for checking connection with the slave expansion boards. N means that there is no link
with the expansion indicated in the address.
Master is only specified on units with 3 or 4 circuits.
Dig.In. slave exp1
12345 67890 12345
CCCCC CCCCC CCCCC
CCC
Displays the state of the digital inputs of expansion 1 (if present) and specifies their state.
C: Contact closed
A: Contact open
Dig.Out. slave exp1
12345 67890 12345
AAAAA AAAAA AAAAA
AAAAA AAAAA AAAA
Displays the state of the digital outputs of expansion 1 (if present) and specifies their state.
C: Contact closed
A: Contact open