System information

C0240111-06-07-GB
51
Mask Description Para n°
>
> >
> > CCCC
> CCCC > CCCC
> CCCC
C=closed,A=open.
XXXX=[input5][input6][input7][input8]
>DI C
>DI C>DI C
>DI C
Displays digital input 09:12:00
> > CCCC
> > CCCC> > CCCC
> > CCCC
C=closed,A=open.
XXXX=[input9][input10][input11][input12]
>DI D
>DI D>DI D
>DI D
Displays digital input 13:15
> > CCC
> > CCC > > CCC
> > CCC
C=closed,A=open.
XXX
-=[input13][input14][input15]
>DO A
>DO A>DO A
>DO A
Displays digital output 1:4
> > CAAA
> > CAAA> > CAAA
> > CAAA
C=closed,A=open.
XXXX=[output1][output2][output3][output4]
>DO B
>DO B>DO B
>DO B
Displays digital output 5:8
> > CAAA
> > CAAA> > CAAA
> > CAAA
C=closed,A=open.
XXXX=[output5][output6
][output7][output8]
>DO C
>DO C>DO C
>DO C
Displays digital output 9:12
> > AAAA
> > AAAA> > AAAA
> > AAAA
C=closed,A=open.
XXXX=[output9][output10][output11][output12]
>AI 1
>AI 1>AI 1
>AI 1
Displays analogue input 1
> > 18.1
> > 18.1 > > 18.1
> > 18.1
value
>AI 2
>AI 2>AI 2
>AI 2
Displays analogue input 2
> > 1
> > 1 > > 1
> > 17.9
7.97.9
7.9
value
>AI 3
>AI 3>AI 3
>AI 3
Displays analogue input 3
> > 25.3
> > 25.3 > > 25.3
> > 25.3
value
>AI 4
>AI 4>AI 4
>AI 4
Displays analogue input 4
> > 30.2
> > 30.2 > > 30.2
> > 30.2
value
>AI 5
>AI 5>AI 5
>AI 5
Displays analogue input 5
> > 24.5
> > 24.5 > > 24.5
> > 24.5
value
>AI 6
>AI 6>AI 6
>AI 6
Displays analogue input 6
> > 24.5
> > 24.5 > > 24.5
> > 24.5
value
>AI 7
>AI 7>AI 7
>AI 7
Displays analogue input 7
> > 0
> > 0 > > 0
> > 0
value
>AI 8
>AI 8>AI 8
>AI 8
Displays analogue input 8
> > 0
> > 0 > > 0
> > 0
value
>AO 3
>AO 3>AO 3
>AO 3
Displays analogue output 3
> > 70
> > 70 > > 70
> > 70
value expressed in Volts
>AO 4
>AO 4>AO 4
>AO 4
Displays analogue output 4
> > 80
> > 80 > > 80
> > 80
value expressed in Volts
SETP
SETPSETP
SETP
Setpoint menu
>MODE
>MODE>MODE
>MODE
The submask is used to set the operating mode (this depends on the machine type set in
the manufacturer menu using the W3000-compact keypad)
> > CH
> > CH> > CH
> > CH
"CH"= Chiller, "HP"= heat pump 43.01
>ACT
>ACT>ACT
>ACT
The submask displays the percentage of active power of the thermoregulator
> > 50
> > 50 > > 50
> > 50
value ranging from 0 to 100
>SUM
>SUM>SUM
>SUM
(If the FLOW parameter in the user menu is set to inlet).
The submask is used to set the
chiller setpoint with inlet adjustment
> > 11.0
> > 11.0 > > 11.0
> > 11.0
expressed in degrees centigrade
43.02
43.03
>SUM
>SUM>SUM
>SUM
(If the FLOW parameter in the user menu is set to outlet).
The submask is used to set the
chiller setpoint with outlet adjustment
> > 9.5
> > 9.5 > > 9.5
> > 9.5
expressed in degrees centigrade 43.05
>
>>
>U
UU
UI
II
In
nn
n
(If the FLOW parameter in the user menu is set to inlet).
The submask is used to set the
heat pump setpoint with inlet adjustment
> > 0
> > 0 > > 0
> > 0
expressed in degrees centigrade 43.04
>
>>
>U
UU
UI
II
In
nn
n
(If the FLOW parameter in the user menu is set to outlet).
The submask is used to set the
heat pump setpoint with outlet adjustment
> > 0
> > 0 > > 0
> > 0
expressed in degrees centigrade 43.06
UNIT
UNITUNIT
UNIT
Unit menu
>EVIN
>EVIN>EVIN
>EVIN
Displays evaporator inlet temperature
>EVO1
>EVO1>EVO1
>EVO1
Displays evaporator 1 outlet temperature
>EVO2
>EVO2>EVO2
>EVO2
(If evaporator 2 is present). Displays evaporator 2 outlet temperature
>CDIN
>CDIN>CDIN
>CDIN
(In water-water units, if the condenser inlet probe is enabled).
Displays condenser inlet
temperature
>CDO1
>CDO1>CDO1
>CDO1
(In water-water units, if the condenser outlet probe is enabled).
Displays condenser outlet
temperature
>CDO2
>CDO2>CDO2
>CDO2
(In water-water units with two condensers, if the condenser 2 outlet probe is enabled).
Displays condenser 2 outlet temperature
>E
>E>E
>EHt
HtHt
Ht
(In water/air units, if the external air temperature probe is enabled).
Displays external
temperature
>OPT
>OPT>OPT
>OPT
(In water-air units, if the operational temperature probe is enabled).
Displays optional
temperature
>HP1
>HP1>HP1
>HP1
Displays circuit 1 high pressure