User's Manual
1
1. Application Overview
1.1. Identifying The Parts
TOP VIEW
1. GREEN LED
— ON: AC Power is ON.
— FLASH every second: AC Power
failure
— FLASH every 2 seconds: Panel or
Device Low battery
— SLOW FLASH: Line Fault (on and off
at every second)
— QUICK FLASH every 2 seconds:
Supervision failure
2. RED LED
— ON: Off-hook / Waiting retry pause /
Ready to enter Programming Mode
(before entering PIN code)
—
FLASH: Programming Mode /
Pendant Learning Mode
3. GREEN RESET BUTTON
— Press once in normal mode to reset
mobility timer (see command 44)
— Before CTC-1041RV dials out for
alarm reporting, press once to cancel
the alarm reporting
— During or at-the-end of conversation,
press once to terminate two-way
voice communication
— In Programming Mode, press once to
return to Idle Mode
— Press & hold for 3 sec: dial the Non-
Emergency call. (See section 4.1.2.)
— Press & hold for 6 sec: enter
Learning Mode
—
Press & hold for 16 sec: disable
mobility setting
4. RED HELP BUTTON (with backlight)
— Back-lit disigned for easy access at
night
— Backlight illuminates when reporting
and off-hook
— Backlight flashes during the waiting
period until help arrives
5. Microphone
6. Speaker
REAR VIEW
7. Phone Jack marked
—
Telephone unit connection
8. Line Jack marked
— Phone line connection from wall
9. DC Jack
—
DC 12V 1A power adapter
connection
10. Battery Switch
11. Local Programming Telephone
Unit Input
—
A special telephone cord to connect
CTC-1041RV and your phone unit
for Local Programming (optional).