User's Manual

11
Step 7. If the camera information is not displayed, check camera power and Ethernet
connection and click on “Search” to update the panel information.
Step 8. (Optional)You can choose to edit the camera’s network setting manually by clicking
on the panel column, then click “Configure Setting”
The LanType is default to DHCP and does not require manual input of
IP/Netmask/Gateawy/DNS setting. If you wish to configure these setting manually,
change LanType to Static.
After finish changing network setting, enter the user name (default: admin) and
password (default:admin1234) then click OK to confirm. The user name and
password can be changed later in the camera’s configuration webpage
Step 9. Click the camera information column and click on “Open Web Page”, or double click