User's Manual

18
The value 100 (pixels) of “Left” determines the horizontal starting position of the region
for detection.
The value 100 (pixels) of “Top” determines the vertical starting position of the region for
detection.
As shown, a value of 100 (pixels) are entered for both “Width” and “Height”, therefore a
100 by 100 motion detection region is determined.
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
2
2
>
>
The green box below is region 1 of motion detection according to the set parameter.
The red box below is region 2 of motion detection according to the set parameter. You
can refer to the horizontal and the vertical scales provided on the respective bottom and
right side of the live feed.
z When confirmed, press “OK” to submit your adjusted parameter. Press “Reset” to
re-enter the parameters (“Reset” button resets the parameters to the previously set
parameters).