User's Manual

2
2. Application Overview
2.1. Identifying the Parts
1. IP Camera Lens
2. Microphone
3. Optical Sensor
4. Power LED (Green)
On: powered
Off: unpowered
5. Warning LED (Red)
Flashes for 2-3 seconds: Activating WPS protocol
Flashes 3 times: WPS pairing successful
Flashes twice: The IP Camera is ready to enter or exit privacy mode
On: The IP Camera is in privacy mode
6. Internet-Connection LED (Blue)
On: connected to internet (wired or wireless)
Off: disconnected from internet
Flashes for 5 minutes: The IP Camera is in learning mode
Flashes quickly: The IP Camera is streaming or recording.
7. Speaker
8. WPS Button
9. Privacy Button
Press and hold for 2 seconds until warning LED flashes twice and release to enter/exit
privacy mode
Press and hold for 10 seconds to enter learning mode
Press and hold for 6 seconds to exit learning mode.
10. Micro-SD slot
11. Ethernet Cable Port
12. DC Jack (5V DC, 2A input)