Parts List

 Mounting the PIR Camera
 Surface mounting:
1. Open the cover by loosening the Cover Screw using a Philips
screwdriver.
2. Break through the 2 Surface knockouts at the center of base.
3. Use the holes as template to drill holes on the surface.
4. Insert the wall plugs if fixing it into plaster or brick.
5. Screw the base into the wall plugs.
6. Fit the cover onto the base and tighten.
 Corner mounting:
1. 4 knockouts are made on the triangular bracket. To fix the bracket
on the Wall A, break through Knockout A & B. To fix the bracket on Wall B, break through Knockout C & D.
To fix the bracket on both of Wall A & B, break through Knockout A & D or B & C.
2. Use the two holes as template to drill holes on the corner surface.
3. Insert the wall plugs.
4. Screw the triangular bracket into the wall plugs with the two pointing sticks (E) on top facing you.
5. Fit the PIR Camera onto the hooks of the triangular bracket.
4