Parts List

5
 Corner mounting:
1. Open the cover by loosening the Cover Screw using a Philips screwdriver.
2. Break through the 4 Corner knockouts at the center of base.
3. Use the holes as template to drill holes on the surface.
4. Insert the wall plugs if fixing it into plaster or brick.
5. Screw the base into the wall plugs.
6. Fit the cover onto the base and tighten.
 Corner mounting with the triangular bracket:
1. 4 knockouts are made on the triangular bracket. To fix the bracket on the Wall A, break through Knockout A
& B. To fix the bracket on Wall B, break through Knockout C & D. To fix the bracket on both of Wall A & B,
break through Knockout A & D or B & C.
2. Use the two holes as template to drill holes on the corner surface.
3. Insert the wall plugs.
4. Screw the triangular bracket into the wall plugs with the two pointing sticks (E) on top facing you.
5. Fit the PIR Camera onto the hooks of the triangular bracket.
 Surface mounting:
1. Open the cover by loosening the Cover Screw using a Philips screwdriver.
2. Break through the 2 Surface knockouts at the center of base.
3. Use the holes as template to drill holes on the surface.
4. Insert the wall plugs if fixing it into plaster or brick.
5. Screw the base into the wall plugs.
6. Fit the cover onto the base and tighten.
 Surface mounting with rotating bracket (optional item, sold separately):
The rotating bracket can be mounted on the wall with provides screws.
1. Screw the rotating bracket into the wall.
2. Fit the 3 hooks of the rotating bracket into the 3 holes of the base accordingly.
3. Rotate the bracket for the proper range of detection and tighten the fixing screw.