USER MANUAL BTX Ankle Tether
USER MANUAL BTX Ankle Tether TABLE OF CONTENTS 1.0 Product Overview ............................................................................................................... 3 1.1 Primary Functionality of the BTX Ankle Tether............................................................... 3 2.0 Operational Description..................................................................................................... 3 2.1 Off State......................................................................
USER MANUAL BTX Ankle Tether 1.0 PRODUCT OVERVIEW Lares Technologies has created a system for monitoring the location of criminal offenders and tracking their position. This system is comprised of an ankle bracelet that is worn by the offender, together with a cell phone that is carried by the offender. The BTX Ankle Tether communicates to the Tracking/Reporting Unit (TRU) cell phone.
USER MANUAL BTX Ankle Tether 2.1 OFF STATE The Off state is designed to be the lowest power state for the BTX Ankle Tether. state, the device will NOT report any status conditions to the TRU cell phone. In this The Off state is entered when a new battery is inserted and the power is applied or when instructed to enter the state by the TRU cell phone while in the On state.
USER MANUAL BTX Ankle Tether 2.3 CHECK BATTERY VOLTAGE The BTX Ankle Tether monitors the battery voltage to ensure it is changed at appropriate intervals. The battery voltage will have two thresholds: the operational threshold, and the low battery threshold. 2.4 CHECK CONDUCTIVE LINK The BTX Ankle Tether must ensure the strap remains connected. The strap contains a conductive element that can be used to detect whether the strap has been disconnected. 2.
USER MANUAL BTX Ankle Tether 3.0 INSTALLATION INSTRUCTIONS 3.1 BTX ANKLE TETHER 1. If necessary, open battery cover and install battery making sure to note + and – placement. Screw down battery cover to “hand tight” using Bit Driver with Phillips bit. 2. Insert t (arrow) end of strap into s (arrow) side of BTX and secure using two pins. The slot in the top of the pin should be perpendicular to the strap and the raised side of the top on the strap side.
USER MANUAL BTX Ankle Tether 11. Check to make sure offender name is correct. 12. If any Status has failed (indicated in Red with icon) take appropriate action to clear. GPS may take a few minutes and may require moving the TRU near a window or taking it outside. 13. After each Status indicator has turned Green place the TRU in its holster and install the Holster Lock. TRU can now be given to offender to start program.
