User's Manual

8
number & GPRS/IP (1-6) is/are to be used
for Status Reporting.
z Available Key-in options:
Tel. Number /
IP Address
Function Selection
Sequence
1
st
Tel. #
(1)
2
nd
Tel. #
(2)
3
rd
Tel. #
(3)
4
th
Tel. #
(4)
5
th
GPRS1 #
(5)
6
th
GPRS2 #
(6)
1
st
& 2
nd
Tel. #s
(12)
1
st
& 3
rd
Tel. #s
(13)
1
st
& 4
th
Tel. #s
(14)
1
st
Tel & 5
th
GPRS. #s
(15)
1
st
Tel & 6
th
GPRS. #s
(16)
2
nd
& 3
rd
Tel. #s
(23)
2
nd
& 4
th
Tel. #s
(24)
2
nd
Tel & 5
th
GPRS. #s
(25)
2
nd
Tel & 6
th
GPRS. #s
(26)
3
rd
& 4
th
Tel. #s
(34)
3
rd
Tel & 5
th
GPRS. #s
(35)
3
rd
Tel & 6
th
GPRS. #s
(36)
4
th
Tel & 5
th
GPRS. #s
(45)
4
th
Tel & 6
th
GPRS. #s
(46)
5
th
& 6
th
GPRS. #s
(56)
1
st
, 2
nd
& 3
rd
Tel. #s
(123)
1
st
, 2
nd
& 4
th
Tel. #s
(124)
1
st
, 3
rd
& 4
th
Tel. #s
(134)
2
nd
, 3
rd
& 4
th
Tel. #s
(234)
1
st
, 2
nd
, 3
rd
& 4
th
Tel. #s
(1234)
1
st
, 2
nd
, 3
rd
, 4
th
Tel. & 5
th
GPRS. #s
(12345)
1
st
, 2
nd
, 3
rd
, 4
th
Tel. 5
th
&
6
th
GPRS. #s
(123456)
z Factory default is set as (123456). Alarm &
Status will be reported to all of 4 Telephone
Numbers+2 GPRS (IP).
<
<
N
N
O
O
T
T
E
E
>
>
) The Tel. number selected in Command
#7 will not be used for alarm and/or
status reporting, even if it is selected
in command #5 and/or #6.
) When multiple Tel. numbers are
selected, CTC-1052 will always dial in
respective programmed order.
) The latest Command (05-06) setting(s)
will overwrite any previously enter
setting(s).
) When CTC-1052 reports, GPRS has
higher proity than phone reporting.
Command 07
Select Telephone Number for Non-
emergency call
z
This command is used to select which
telephone number will be used for non-
emergency call.
z The selected Tel. number will not be used
for alarm, status, other alarm and/or
Mobility reporting, even if it is selected in
command #5 and/or #6.
z Available key-in options:
Tel. Number
Function Selection
Sequence
Disable
(0)
1
st
Tel. #
(1)
2
nd
Tel. #
(2)
3
rd
Tel. #
(3)
4
th
Tel. #
(4)