User's Manual

1
1. Application Overview
1.1. Identifying The Parts
TOP VIEW
1. GREEN LED
— ON: AC Power is ON.
— FLASH every second: AC Power
failure
— FLASH every 2 seconds: Panel or
Device Low battery
— QUICK FLASH every 2 seconds:
Supervision failure
2. RED LED
— ON: Off-hook / Waiting retry pause /
Ready to enter Programming Mode
(before entering PIN code)
— FLASH: Programming Mode /
Pendant Learning Mode
3. GREEN RESET BUTTON
— Press once in normal mode to reset
mobility timer (see command 44)
—
Before CTC-1052 dials out for alarm
reporting, press once to cancel the
alarm reporting
— During or at-the-end of conversation,
press once to terminate two-way
voice communication
— In Programming Mode, press once to
return to Idle Mode
— Press & hold for 3 sec: dial the Non-
Emergency call. (See section 4.1.2.)
— Press & hold for 6 sec: enter
Learning Mode
— Press & hold for 16 sec: disable
mobility setting
4. RED HELP BUTTON (with backlight)
— Back-lit disigned for easy access at
night
— Backlight illuminates when off-hook
— Backlight flashes during the waiting
period until help arrives
5. Microphone
6. Speaker
REAR VIEW
7. GPRS/3G SIM Card Base
— This slot is for inserting a SIM card.
8. GPRS/3G Reset Button
— Press & hold for 1 sec: GPRS/3G
automatically resets
9. GPRS/3G Module LED Indicator (Red)
— When power is supplied to CTC-
1052, the LED will light up for 5
seconds.
— One flash per second indicates a
noraml 3G connection.
— One flash every five seconds
indicates no 3G connection/signal.
10. GPRS/3G Fault Indicator (Yellow)
— FLASH every 5 seconds: SIM card
missing
— 2 FLASHES every 5 seconds: No
signal/reception
— 3 FLASHES every 5 seconds:
GPRS/3G module abnormal
— 4 FLASHES every 5 seconds: SIM
card PIN code error
<
<
N
N
O
O
T
T
E
E
>
>
) Fault indicator priorities: GPRS/3G
module abnormal > SIM card missing
> No signal/reception > SIM card PIN
code error