User's Manual

20
CORRESPON-
DING DTMF
CHARACTER
COMMANDS
ITEM COMMAND EXAMPLE & USAGE DEFAULT
49# Supervision SUPPR
PROG 8744 SUPPR:0
To set the supervision timer
0=Disable, 1=4 Days, 2=5 Days, 3=6 Days
4=7 Days, 5=8 Days, 6=9 Days, 7=10 Days
0 = Disable
53# Prompt LANGU
PROG 8744 LANGU:0
To set voice prompt language.
0=English, 1=Arabic, 2=Spanish, 3=Russian, 19=other,
20=Beep
0 = English
54#
Fall Sensor
Sensitivity
FALSN
PROG 8744 FALSN:3
To set Fall Sensor Sensitivity,
1 ~ 5 Levels, 1=Lowest Sensitivity, 5= Highest Sensitivity
3
63#
Set speaker
volume
SPKVL
PROG 8744 SPKVL:2&5 (4G/LTE)
 To set speaker volume in two-way mode for 4G/LTE.
The sequence is: Mode Number + & + Speaker Volume
 Communication Mode Number: 1 digit ( 2: Two-way)
 Speaker Volume: 1 digit (Number 1-5). The higher the
value, the louder the voice.
Two-way:2
Volume
Level: 5
64#
Set
microphone
sensitivity
MICSN
PROG 8744 MICSN:1-5
 To set the microphone volume with a number, ranging
1-5. The higher the value, the wider range the
sound received. Default is set as (3).
Note: only can be adjusted in the two-way mode.
Mic: 3
66#
Set guard
time for fall
sensor
FAGUD
PROG 8744 FAGUD：15
To set the guard time delay time for fall sensor.
00=Instant, 01-99=1-99 seconds
15 sec
77#
Speech
report ack
SPACK
PROG 8744 SPACK:1
Speech report acknowledgement.
0 = Any DTMF On, 1 = OFF-HOOK
Any DTMF
--- IP address TCIP1
PROG 8744 TCIP1:192.168.1.110
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
3.18.43.178
--- IP address TCIP2
PROG 8744 TCIP2:192.168.1.110
To set/change the IP address for the Monitoring Station
Input IP address: 000.000.000.000 to 255.255.255.255
66.161.236.
177
--- Port number PORT1
PROG 8744 PORT1:3301
To set/change the port number for the IP address
Input 1 to 5 digits
17000
--- Port number PORT2
PROG 8744 PORT2:3301
To set/change the port number for the IP address
Input 1 to 5 digits
17000
---
GPRS/IP
account
number
IPAC1
PROG 8744 IPAC1:1052
To set/change the GPRS/IP account number (4-10digit)
---
GPRS/IP
account
number
IPAC2
PROG 8744 IPAC2:1052
To set/change the GPRS/IP account number (4-10digit)
---
Access
Point Name
APNSR
PROG 8744 APNSR:INTERNET
To set/change the Access Point Name (APN server, 31
digits)
c2.korem2
m.com
--- User name GPUSE
PROG 8744 GPUSE:123
To set/change the user name
Input 1 to 15 alphanumeric characters
No user
name