User's Manual

31
Step 2: Press the Device Button within 20 secs, a “Learn Device success!” message will pop up to
indicate successful learning.
<NOTE>
 Learning can only be completed within the signal reception range of CTC-1052-QT-DT35A.
If no signal is received within 20 sec, a “Learning Fail” message will pop up, and CTC-1052-
QT-DT35A will automatically return to Programming mode.
 Adding a Device for a second time is prohibited unless it is removed from the system first.
80# Remove All Device
- Click “Remove” to remove all devices from CTC-1052-QT-DT35A. A message “Remove All
Device command success!” will pop up.
81# Remove Zone 1 Device
- Click “Remove” to remove zone 1 device from CTC-1052-QT-DT35A. A message “Remove Zone
1 Device command success!” will pop up.