User's Manual

47
6.2. CTC-1052-QT-DT35A Programming Command Table
DTMF
CHARACTER
COMMANDS
DTMF
ACK
COMMAND OPERATION
TERM
I-
NATO
R
DTMF
ACK
DEFAULT
00# Bi
To Set Caller ID (201-220)
Enter: Caller ID Sequence + * + Caller ID
Note: Caller ID Sequence: 201-220
Symbol: *
Caller ID: maximum 20 digits
Example: 201*27912518 (201 represents that it’s the
1
st
Caller ID; 27912518 represents the Caller ID)
# Bi
1
st
Caller ID:
8008604230
2
nd
Caller CID:
8005086370
01# Bi
Telephone number 1
(Used as Primary Medical Alarm number)
# Bi 18447479515
02# Bi
Telephone number 2
(Used as Secondary Medical Alarm number)
# Bi 18448373010
03# Bi
Telephone number 3
(Used as Primary Fire/CO2 Alarm number)
# Bi 18554250461
04# Bi
Telephone number 4
(Used as Secondary Fire/CO2 Alarm number)
# Bi 18557070111
05# Bi
Telephone number & GPRS/IP for alarm report
1=TEL1 , 2=TEL2 , 3=TEL3 , 4=TEL4,
5=GPRS1 , 6=GPRS2
# Bi 1234
06# Bi
Telephone numbe
r
& GPRS/IP for status report
1=TEL1 , 2=TEL2 , 3=TEL3 , 4=TEL4,
5=GPRS1 , 6=GPRS2
# Bi 56
10# Bi Global account number, 4 or 6 or 8 digits # Bi No account number
11# Bi 4 or 6 or 8 digits Account number 1 (Tel. Number 1) # Bi No account numbe
r
12# Bi 4 or 6 or 8 digits Account number 2 (Tel. Number 2) #Bi No account numbe
r
13# Bi 4 or 6 or 8 digits Account number 3 (Tel. Number 3) # Bi No account number
14# Bi 4 or 6 or 8 digits Account number 4 (Tel. Number 4) # Bi No account numbe
r
20# Bi
All formats the same,
3 = Speech, 4 = SMS CID
# Bi 3=Speech
21# Bi 3 = Speech, 4 = SMS CID # Bi 3=Speech
22# Bi 3 = Speech, 4 = SMS CID # Bi 3=Speech
23# Bi 3 = Speech, 4 = SMS CID # Bi 3=Speech
24# Bi 3 = Speech, 4 = SMS CID # Bi 3=Speech
31# Bi Ringer enable, 0 = Disable, 1 = Enable # Bi Ringer Disabled
32# Bi Audible fault alert, 0 = Off, 1 = On # Bi Off
34# Bi
Emergency button enable, 0 = Button off, 1 = Button
on
# Bi
Emergency button
On
35# Bi Silent Mode, 0 = Silent mode On, 1 = Silent mode Off # Bi Silent mode Off
37# Bi AC fault report, 0 = Off, 1 = On # Bi On
38# Bi
Follow-On & Call Back Function, 0 = Follow-On
(Reserved) , 1= Call-Back, 2= Follow-On & Call-Back
# Bi 0 = Follow-On
40# Bi Set Access Code # Bi 8744
41# Bi
Auto answer for Remote programming,
00 = call twice, 01 - 09 = Auto answer 1 - 9 rings
# Bi 0
42# Bi
Guard time delay for any compatible sensor (except
Fall Sensor), 00 = Instant reporting; … 99 = 99
seconds
# Bi Instant reporting