User's Manual

48
DTMF
CHARACTER
COMMANDS
DTMF
ACK
COMMAND OPERATION
TERMI-
NATOR
DTMF
ACK
DEFAULT
43# Bi
Test Call: DDHHMM
DD:00-07=0-7 Day(s)
HH= 00-23=0-23 Hour(s)
MM=00-59=0-59 Min(s)
000000= Disable
# Bi 7 Days
44# Bi
Mobility time
00= Disable, 01 - 36= 1 - 36 Hours
# Bi
Mobility time
disable
46# Bi
Two-Way Period,
01=1 min, 02=2mins, 03=3mins, 04=4mins,
05=5mins, 06=6mins, 07=7mins, 08=8mins,
09=9mins, 10=10mins.
# Bi 10 minutes
47# Bi
Of
f
-set time, 1=1 hour, 2=2 hours, 3=3 hours,
4=4 hours, 5=8hours, 6=12 hours
# Bi 1 Hour
49# Bi
Supervision, 0 = disable, 1 = 4 days, 2 = 5 days, 3 =
6 days,4 = 7 days, 5 = 8 days, 6 = 9 days, 7 = 10 days
# Bi Disable
53# Bi
V
oice prompt language.
0=English,1=Arabic,2=Spanish,3=Russian,
19= other, 20=Beep only
# Bi 0
54# Bi
Fall Sensor Sensitivity
1 ~ 5 Levels
1= Lowest Sensitivity, 5= Highest Sensitivity
# Bi 3
55# Bi
High Temperature Reporting Threshold
032 ~ 200 °F
# Bi 95 °F
56# Bi
Low Temperature Reporting Threshold
032 ~ 200 °F
# Bi 47 °F
57# Bi
CO2 Alarm Reporting Threshold
0 - 9999ppm
# Bi 800ppm
63# Bi
Set Speaker Volume
Enter: Mode Number + ＊+ Speaker Volume
Note: Mode Number: 1 digit (2:Two-way)
Speak volume: 1 digit (1-5 level) (4G/LTE)
# Bi
Two way mode
Volume Level 5
64# Bi
Set Microphone Sensitivity:
Note: Mic sensitivity: 1 digit (1-5 level)
Only can be adjusted in the two-way mode.
# Bi Two way Mode: 3
66# Bi
Guard time delay for Fall Sensor, 00 = Instant
reporting; … 99 = 99 seconds
# Bi 15 sec
76# Bi Call progress tone, 0 = Off, 1 = On # Bi Off
77# Bi
Speech report acknowledgement, 0 = Any DTMF On,
1 = OFF-HOOK
# Bi Any DTMF
80# Bi Remove all devices (learnt in Command 93-94) --- --- ---
81# Bi Remove Zone 1 device --- --- ---
82# Bi Remove Zone 2 device
93# Bi Learn-in silent emergency transmitters --- Bi Bi No device
94# Bi
Learn-in smoke detectors, CO detectors,
pendants and fixed emergency transmitters, long
range pendants
--- Bi Bi No device
98# Bi
Load defaults when ＊＊ is pressed (DTMF A is
heard after defaults have been loaded)
# Bi ---
99# Bi Exit programming mode ---