User's Manual

23
4.1.9. Country Code
The Phone Number Format for each SIM card
may vary between different Telecom
companies. Thus, you can either check with
your Telecom provider or follow the steps
described below to check the correct format.
Step 1: Remove the SIM card from SIM card
holder on the Panel, and insert it into
a workable mobile phone.
Step 2: Power on the mobile phone and send
a test SMS message to another
mobile telephone number.
Step 3: Once the test message is received,
you can then check the phone
number format shown in the received
message.
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
>
>
With the phone number 0987654321
, the
format should either INCLUDE or EXCLUDE
Contry Code, which is “886” for Taiwan as
below:
INCLUDE
Country Code
[phone]
EXCLUDE
Country Code
0987654321
Step 4. Remove the SIM card from the Mobile
phone and insert it back into SIM
Card holder on Panel.
A. If the Phone Number Format EXCLUDES
Country Code, please skip this section.
B. If the Phone Number Format INCLUDES
Country Code, please proceed to SMS
Remote Program and send in this format:
“PROG 1111 REPLA:886&0”
Where:
PROG = SMS Keyword
1111 = Access Code
REPLA = SMS command for Country
Code
886 = number to be replaced
0 = number to substitute
After this is completed, Country Code “886”
will be replaced by “0”.
4.2. Alarm Activation
z When an alarm is triggered, CTC-
1052RV will enter the Guard Time
Delay period (see Command 42), both
RED LED and RED HELP BUTTON
backlight turn on steadily.
 During the Guard Time period,
pressing the RESET
button on CTC-
1052RV, it will cancel the alarm
signal and return to Idle Mode.
 If the Guard Time Delay is set as 00,
CTC-1052RV will dial immediately.
z The Alarm reporting cannot be
cancelled by pressing the RESET
button on CTC-1052RV after the
Guard Time Delay expires.
z The first alarm reporting priority is
GPRS Reporting Method.
z Press and hold the WTRV/ WTRVS’s
button for 8 seconds to terminate
alarm reporting, instead of the RESET
button on CTC-1052RV.
Confirmation Beeps
z Once Guard Time Delay expires,
CTC-1052RV will summon help based
on the programmed reporting method.
A continuous confirmation beeping
sound (about
1 secs per beep) will be
heard after CTC-1052RV dials out, to
inform you that the call is in progress
(regardlss of Digital or Speech
Reporting Method).
z Confirmation beeps will be heard in
the following situations:
 After CTC-1052RV dials out to
summom help until kiss off (for Digital
Reporting Method)
 After CTC-1052RV dials out to
summom help until the call is
answered (for Speech Reporting
Method)
 When first reporting failed, and CTC-
1052RV retries
z Once the first reporting succeeded,
and CTC-1052RV is in progress of
back-up reporting, the confirmation
beeps will not be heard.