User's Manual

30
every 2 secs with 2 beeps.
z 380 - WTR Low Battery
 When Wrist Transmitter (WTR) or
Emergency Pendant is under Low
Battery Status, Green LED flashes
every 2 secs with 2 beeps.
z 384 - Other devices Low Battery
 When other devices are under Low
Battery Status, Green LED flashes
every 2 secs with 2 beeps whenever
Low Battery signal is received from
the device. The frequency of the beep
will depend on the device.
z 406 - Emergency Cancel
 When the GREEN REST BUTTON is
pressed while reporting to Monitoring
Center.
z 602 - Periodic test report
 When CTC-1052RV makes periodic
Check-in reporting.
z 606 - Follow-On Function
 When CTC-1052RV receives kiss-off
from Monitoring Center for opening
Speech channel.
z 611 - Global test
 When CTC-1052RV reports Global
Test to Monitoring Center.
z 641 - Mobility
 When CTC-1052RV makes Mobility
Check reporting.
5.2. Tunstall Event Code
z D#1011 - Panel AC Restored
 When AC power is restored to CTC-
1052RV.
z D#1012 - Global test & Periodic test call
report
 When CTC-1052RV reports Global
Test to monitoring Center.
 When CTC-1052RV reports Periodic
test call to monitoring Center.
z D#1013 - Sensor Supervisory Failure
 When CTC-1052RV Pro is unable to
receive the signal transmitted from the
Wrist Transmitter for a pre-set period
by Command #49.
z D#1014 - Device Low Battery
 When other devices (except SD and
WTR) are under Low Battery Status,
Green LED flashes every 2 secs with
2 beeps whenever Low Battery signal
is received from the device.
z D#1015 – Mobility/ Inactivity
 When CTC-1052RV Pro makes
Mobility Check reporting.
 If no sudden movement within 10
seconds after fall detection, an
inactivity code will be sent to Central
Monitoring Station.
z D#1016 - Personal emergency or Fall
emergency
 When Wrist Transmitter (WTR),
Emergency Pendant or Fall Sensor is
pressed.
 When a fall sensor is triggered.
z D#1017 - Panel emergency
 When the RED HELP Panel button is
pressed.
 When Water sensor is triggered.
z D#1018 - Smoke emergency
 When Smoke Detector (SD) is
triggered.
 When Carbon Monoxide Detector (CO)
is triggered.
z D#1019 - Panel AC Failure
 When AC power fails for more than 10
sec, Green LED flashes every sec
with a beep every 30 secs.
z D#1019 – Panel Low battery
 When CTC-1052RV Pro is under Low
Battery status, Green LED flashes
every 2 secs with a beep every hour.
5.3. Scancom Event Code
z 515555517 - Panel emergency, WS
Emergency or Fall emergency
 When the red HELP Panel button is
pressed or WS triggered.
 When a fall sensor is triggered or
pressed.
z 515555557 - Cancel Panel emergency