User's Manual

5.1. Arming Setting

The Arming Setting includes parameters which affects system mode change function. Click “Edit”

to modify each setting.

 Arm Fault Type: Select how the system should respond when it is being armed under

fault condition.

 Confirm: The panel will first display a “Mode Change Fault” message and emit 2

beeps. Arming again within 10 seconds will force arm the system.

 Direct Confirm: The system will be force armed directly without displaying fault

message and report an event.

 Final Door: If set to On: When the system is Away Armed and under exit timer

countdown, if an opened Door Contact is closed, the system will automatically arm the

system even if the exit delay timer has not expired yet.

 Entry Delay 1 for Arm Away: Set Entry Delay Timer 1 for Away Arm mode. When a

sensor set to Start Entry Delay 1 is triggered under Away Arm mode, the control panel

will begin Entry Delay Timer countdown according to duration set with this option

If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns

to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before

the Entry Delay Timer expires, the alarm will be activated and the panel will send

report.

 Entry Delay 1 for Arm Stay: Set Entry Delay Timer 1 for Arm Stay mode. When a

sensor set to Start Entry Delay 1 is triggered under Arm Stay mode, the control panel

will begin Entry Delay Timer countdown according to duration set with this option

If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns

to Disarm mode and no alarm is activated. If the Control Panel is not disarmed before

the Entry Delay Timer expires, the alarm will be activated and the panel will send

report.

 Entry Delay 2 for Arm Stay: Set Entry Delay Timer 2 for Arm Stay mode. When a

sensor set to Start Entry Delay 2 is triggered under Arm Stay mode, the control panel

will begin Entry Delay Timer countdown according to duration set with this option

If the Control Panel is disarmed before the Entry Delay Timer expires, the panel returns